[yudi]

我想安装车库门的遥控装置,能买来自己装吗?在哪儿买?有谁知道的告诉一声.先谢谢啦!

[基础墙]

到Home Depot买个随便什么样的遥控器，照着说明setup一下就行了。

那玩意儿的讨厌之处是，要是赶上停电时间稍长点儿，garage door opener就会把遥控器给忘了，任你按多少遍芝麻开门，它也不给你开门。

Kanata的南面总闹停电，经常是回到家就发现一大堆东西都得重新setup，气死人。

[yudi]

谢谢基础墙！还想问一下,遥控器不能使用的时候用钥匙不行吗?两者能不能同时存在?

[基础墙]

最初由 yudi 发布
谢谢基础墙！还想问一下,遥控器不能使用的时候用钥匙不行吗?两者能不能同时存在?

它们倒是也可以同时存在，双保险，拧了钥匙再按遥控器才能打开车库门

开玩笑呐。Garage door opener是自锁的，在外面用手打不开。另外，要是把车库门用原来的锁给锁上，就没法自动开门了。所以装自动车库门的时候，都把车库门的锁给“废”了－－放在常开的位置。

要是赶上遥控器不灵，只好从大门进去，再从里面把车库门打。我就碰上过几次这事 。

[基础墙]

最初由 yudi 发布
我想安装车库门的遥控装置,能买来自己装吗?在哪儿买?有谁知道的告诉一声.先谢谢啦!

对不起，有点不清楚，你是想给你的garage door opener买个遥控器，还是想装个garage door opener？Setup那个遥控器只要按两个按钮，装garage door opener就费事多了。

[kitaro]

我自己刚刚装了一个，从SEARS买的，安装共花了6个小时，去了CT3次。

[yudi]

是我没说清楚,是想装一个garage door opener。安装很麻烦吗？能不能给推荐一个安装的人？谢谢啦！

[PrideOfChinese]

最初由 基础墙 发布
到Home Depot买个随便什么样的遥控器，照着说明setup一下就行了。

那玩意儿的讨厌之处是，要是赶上停电时间稍长点儿，garage door opener就会把遥控器给忘了，任你按多少遍芝麻开门，它也不给你开门。

Kanata的南面总闹停电，经常是回到家就发现一大堆东西都得重新setup，气死人。

I Sears garage door opener doesn't have this problem. It never loose code. It works with rolling code - a great security feature. We experienced power outage a couple of times, but never get your problem.

[PrideOfChinese]

最初由 yudi 发布
是我没说清楚,是想装一个garage door opener。安装很麻烦吗？能不能给推荐一个安装的人？谢谢啦！

It depends on if you are a handy man. To my knowledge, a lot of people did it themselves eventually. It may take you a day if you do it first time. The key point is the track and the connect on the door. If you are not so confident, a local general contractor can do for you at cost ~$100.

[Timothy's]

http://www.yellowpages.ca/searchCust...ry&city=ottawa

Garage door king. The person service kanata (613-8382016) replaced my door torsion spring. He did a good job.

http://www.factsfacts.com/MyHomeRepair/springs.htm
If your door uses torsion spring I recommend finding a professional to do the job. You may need to adjust the torsion. The spring is under tension, you use two steel bars to twist the spring. If you lose control you may get hurt.
If your door uses extension spring, it is ok to DIY. But I will still use professional to do it. Many small adjustments are needed. If it is not done right, too much load will put on the door and garage door opener .This will wear them out faster. Comparing to few thousand dollar of the door and opener. Two hundred dollar is good price to pay.
.

[DayInDayOUt]

I installed my garage door opener with a friend since my garage ceiling is very high so I needed some one to help me to hang the rail.
I replaced one side of torsion spring for my wooden(heavy) garage door myself and replaced a coil spring for my relative's metal(light) garage door.
All the tasks are doable but you have to do the homework before starting the real project.
You may ask your friends or get a professional to help you.

[tian]

http://comefromchina.com/newbbs/show...t=%B0%B2%D7%B0

[悠着点]

你推荐的这个GEORGE的电话对么? 我留了几次言给他, 他从来没有回过话...

最初由 tian 发布
http://comefromchina.com/newbbs/show...t=%B0%B2%D7%B0

[悠着点]

版主, 这个人叫啥名字啊?

最初由 Timothy's 发布
http://www.yellowpages.ca/searchCust...ry&city=ottawa

Garage door king. The person service kanata (613-8382016) replaced my door torsion spring. He did a good job.

[Timothy's]

Sorry, I did not ask the name.