为什么网络常常断?关掉很长时间后重启才能用

找周末工

新手上路
注册
2009-09-17
消息
45
荣誉分数
2
声望点数
0
网络常常断已经有1/2个月了。以前断了的时候,关掉DSL后重启即可使用。

但现在要关掉1/2个小时后再重启才能正常运转。不知道是什么原因?是不是DSL太老了?我把DSL拍了照传上来,希望能得到指点。谢谢先!
 

附件

  • IMG00150.jpg
    IMG00150.jpg
    37 KB · 查看: 685
我的也是,一家公司,这一两个月常断,甭管它,大约几分钟好了,几分钟又断了,又好了,又断了。。。你拔拔POWER也行,不拔也行。
原来有时网上还打打牌,现在不能打了,正打的呢,断了,大把的丢分,再好的牌也得输,整你没商量。
后悔离开BELL。
 
lz是用的router链接acanac的猫吧,如果是的话,需要把猫设置成bridge。acanac的猫都是带有记忆拨号用户名和密码功能的。搜一下bridge modem看看,或者打电话给acanac,问怎么bridge。

如果猫是单独链接电脑,试着别电脑拨号。

你图片里面DSL的灯没亮,说明并没有信号进入到你的猫里面。
 
4个灯不亮,就不能上网。
但是房东弄的,你说的好像有点复杂,我都没了头绪。


lz是用的router链接acanac的猫吧,如果是的话,需要把猫设置成bridge。acanac的猫都是带有记忆拨号用户名和密码功能的。搜一下bridge modem看看,或者打电话给acanac,问怎么bridge。

如果猫是单独链接电脑,试着别电脑拨号。

你图片里面DSL的灯没亮,说明并没有信号进入到你的猫里面。
 
我的网络也有问题,每次开机后,总出现limited or no connectivity. 需要房东把猫关了,再开,我再连接才能上,请问大家是什么原因。 谢谢
 
就modem而言,大都是名厂所产,质量不会差很多。

反而是dsl线路会参差不齐。

服务好的ISP,会帮你分析线路参数,帮助你改善和调整。

尤其以下面俩个参数重要,

Line Attenuation

SN Margin

研究一下还是很有必要的。



example:

Link Information




Uptime:0 days, 21:03:47
spacer.gif

Modulation:G.992.1 annex A
spacer.gif

Bandwidth (Up/Down) [kbps/kbps]:800 / 4.032
spacer.gif

Data Transferred (Sent/Received) [MB/GB]:327,58 / 1,52
spacer.gif

Output Power (Up/Down) [dBm]:11,5 / 19,0
spacer.gif

Line Attenuation (Up/Down) [dB]:31,5 / 57,0
spacer.gif

SN Margin (Up/Down) [dB]:9,0 / 6,0
spacer.gif

Vendor ID (Local/Remote):TMMB / ALCB
spacer.gif

Loss of Framing (Local/Remote):0 / 0
spacer.gif

Loss of Signal (Local/Remote):1 / 0
spacer.gif

Loss of Power (Local/Remote):0 / 0
spacer.gif

Loss of Link (Remote):0
spacer.gif

Error Seconds (Local/Remote):116 / 0
spacer.gif

FEC Errors (Up/Down):0 / 0
spacer.gif

CRC Errors (Up/Down):0 / 3.087
spacer.gif

HEC Errors (Up/Down):0 / 2.609
 
请问怎么才能拿到这些数据?
谢谢
 
看看我isp的解释

http://www.teksavvy.com/en/support.asp

我的线路参数就算是最惨的了,所以能达到现在的这个速度,我已经是满意了。

虽然偶尔也有掉线,但都不是在白天使用中。基本没察觉,是事后看线路状态才发觉的。

就modem而言,大都是名厂所产,质量不会差很多。

反而是dsl线路会参差不齐。

服务好的ISP,会帮你分析线路参数,帮助你改善和调整。

尤其以下面俩个参数重要,

Line Attenuation

SN Margin

研究一下还是很有必要的。



example:

Link Information




Uptime:0 days, 21:03:47
spacer.gif

Modulation:G.992.1 annex A
spacer.gif

Bandwidth (Up/Down) [kbps/kbps]:800 / 4.032
spacer.gif

Data Transferred (Sent/Received) [MB/GB]:327,58 / 1,52
spacer.gif

Output Power (Up/Down) [dBm]:11,5 / 19,0
spacer.gif

Line Attenuation (Up/Down) [dB]:31,5 / 57,0
spacer.gif

SN Margin (Up/Down) [dB]:9,0 / 6,0
spacer.gif

Vendor ID (Local/Remote):TMMB / ALCB
spacer.gif

Loss of Framing (Local/Remote):0 / 0
spacer.gif

Loss of Signal (Local/Remote):1 / 0
spacer.gif

Loss of Power (Local/Remote):0 / 0
spacer.gif

Loss of Link (Remote):0
spacer.gif

Error Seconds (Local/Remote):116 / 0
spacer.gif

FEC Errors (Up/Down):0 / 0
spacer.gif

CRC Errors (Up/Down):0 / 3.087
spacer.gif

HEC Errors (Up/Down):0 / 2.609
 
作一个更正,在我搜索这个答案的时候,我发现前面对于modem,网上有不同的意见,就是人们在寻找在比较低的信噪比下工作比较稳定和出色的modem,可见modem也还是有所分别的。

关于线路数据,我的speedtouch modem是直接可以显示的,那之前我用speedstream modem,我也曾查看过线路状态,具体的软件名称我找到了,是DMT

http://dmt.mhilfe.de/

是不是普适于所有的modem,我不知道,最好查一下,你的modem型号,以及别人的使用经验,据说不是DMT的版本越高越好,当时我看到的说明是只能用版本7的。

该软件是德文的,所以最好找到英文的使用说明先。


请问怎么才能拿到这些数据?
谢谢
 
那个猫该换新的了。
 
我的也是这家,也是最近两个月经常断,一般发生在看在线的时候,看来不是modem的问题,可能是Bell使坏。


我的也是,一家公司,这一两个月常断,甭管它,大约几分钟好了,几分钟又断了,又好了,又断了。。。你拔拔POWER也行,不拔也行。
原来有时网上还打打牌,现在不能打了,正打的呢,断了,大把的丢分,再好的牌也得输,整你没商量。
后悔离开BELL。
 
家里有人开BT,电驴,看PPS, PPLive的话就这毛病,买个好一点的router,dual band的会好点。modem换新的,20块买个TP-Link。
 
Today, I go to my new home to check if Teksavvy has had Bell to connect my ADSL.

I first saw the lights on modem is ON, great. later I saw a 'Record of Work Completed' form from Bell, which states the work and charge(no charge). Bell's service improved :)

I got 799, 5055 speed for up/down and
Line Attenuation is only 3.0/3.5
SN Margin is 17/30.5

Wow, such a good sync. I knew Bell has been replacing the line in Centrepointe area, and I might get the upgraded line this time.


Just before I post these info, I found the Modulation is G. 992.3 annex A which means the tech has been upgraded to ADSL2. In my post last year at my old home, it's G.992.1 annex A

I am supposed to be able to get at least 12M Internet, yahoo!!!


俩个参数重要,

Line Attenuation

SN Margin

研究一下还是很有必要的。



example:

Link Information




Uptime:0 days, 21:03:47
spacer.gif

Modulation:G.992.1 annex A
spacer.gif

Bandwidth (Up/Down) [kbps/kbps]:800 / 4.032
spacer.gif

Data Transferred (Sent/Received) [MB/GB]:327,58 / 1,52
spacer.gif

Output Power (Up/Down) [dBm]:11,5 / 19,0
spacer.gif

Line Attenuation (Up/Down) [dB]:31,5 / 57,0
spacer.gif

SN Margin (Up/Down) [dB]:9,0 / 6,0
spacer.gif

Vendor ID (Local/Remote):TMMB / ALCB
spacer.gif

Loss of Framing (Local/Remote):0 / 0
spacer.gif

Loss of Signal (Local/Remote):1 / 0
spacer.gif

Loss of Power (Local/Remote):0 / 0
spacer.gif

Loss of Link (Remote):0
spacer.gif

Error Seconds (Local/Remote):116 / 0
spacer.gif

FEC Errors (Up/Down):0 / 0
spacer.gif

CRC Errors (Up/Down):0 / 3.087
spacer.gif

HEC Errors (Up/Down):0 / 2.609
 
你们家是不是每个电话都装FILTER了?
 
后退
顶部