渥太华华人社区服务中心
资深人士
- 注册
- 2005-01-31
- 消息
- 7,312
- 荣誉分数
- 43
- 声望点数
- 208
渥太华华人社区服务中心现急聘如下全职带薪IT职位：
1) 初级3D图形应用工程师
2) RF射频工程师
3) 无线产品验证专员
4) 嵌入式软件设计师
应聘条件：
1）在国内或加拿大有IT教育背景及工作经历；
2）身份为加拿大移民或公民
3）须做英语评估测试，评估结果至少要有两项（听、说、读、写）达到7级（满分10级）；
4）须通过ProveIT专业IT技能测试 (分数需达到70%以上)。
联系人：
郭 崧 ，电话: (613) 235-4875 转138；Email：song.guo@occsc.org
Scarlett 董， 电话: (613)235-4875 转146；Email: scarlett.dong@occsc.org
注：英语评估测试请与英语评估中心(Assessment Centre)直接联系。英语评估中心地点：240 Catherine Street 3楼308室, 电话: (613)238-5462 转10、14或 20。
每一职位的具体要求如下所述:
1. Junior 3D Graphics Application Developer
Responsibilities and Qualifications:
• Experience or strong interest in 3D computer graphics with OpenGL or DirectX, and 3D geometric programming.
• Experience in OOP or OOD with C++/C# and Windows GUI development.
• Understanding of group-based software development processes.
• Strong debugging and problem solving skills.
• Proven ability to work on tasks independently and to meet time lines and quality objectives.
• A strong desire to learn and continually undertake new challenges and technologies.
2. RF Designer
Responsibilities and Qualifications:
• Extensive RF circuit design in the 1-6GHz frequency range
• Comfortable with the PHY and MAC layer aspects of 802.11 WLAN standards
• Familiarity and exposure to digital and low frequency analog design
• Knowledge and use of analog and RF simulation tools (i.e.; Agilent ADS, MathCAD, HSPICE)
• Comfortable using industry standard circuit schematic and layout CAD tools
• Strong practical knowledge of circuit testing and characterization techniques
• Board level design, functional and parametric test
3. Product Verification Specialist
Responsibilities and Qualifications:
• Previous experience working on wireless or IP networking products
• Strong and structured investigative and debugging skills
• Exposure to test tools, automation development
• IP networking test tools such as IXIA, Smartbits and Agilent
• Wireless test tools such as: Airopeek, Azimuth, Ekahau, OminSpectrum, Veriwave
• Test automation development: TCL, Java, Junit, Python
• IP and wireless protocols
4. Embedded Software Designer
Responsibilities and Qualifications:
• Multi-radio product software feature development
• Advanced knowledge of C and Real Time Operating Systems (eLinux, VxWorks, etc)
• Experience with radio MAC layer and/or associated wireless protocols
• Wide ranging data communication experience covering aspects of layer 2 and layer 3 IP networking.
• Experience in developing OAM software layers (CLI, HTTP, SNMP, embedded databases)
• Ability to work closely with hardware verification environments
• Experience with end to end software development including s/w specification, design methodologies and processes, and design for testability
1) 初级3D图形应用工程师
2) RF射频工程师
3) 无线产品验证专员
4) 嵌入式软件设计师
应聘条件：
1）在国内或加拿大有IT教育背景及工作经历；
2）身份为加拿大移民或公民
3）须做英语评估测试，评估结果至少要有两项（听、说、读、写）达到7级（满分10级）；
4）须通过ProveIT专业IT技能测试 (分数需达到70%以上)。
联系人：
郭 崧 ，电话: (613) 235-4875 转138；Email：song.guo@occsc.org
Scarlett 董， 电话: (613)235-4875 转146；Email: scarlett.dong@occsc.org
注：英语评估测试请与英语评估中心(Assessment Centre)直接联系。英语评估中心地点：240 Catherine Street 3楼308室, 电话: (613)238-5462 转10、14或 20。
每一职位的具体要求如下所述:
1. Junior 3D Graphics Application Developer
Responsibilities and Qualifications:
• Experience or strong interest in 3D computer graphics with OpenGL or DirectX, and 3D geometric programming.
• Experience in OOP or OOD with C++/C# and Windows GUI development.
• Understanding of group-based software development processes.
• Strong debugging and problem solving skills.
• Proven ability to work on tasks independently and to meet time lines and quality objectives.
• A strong desire to learn and continually undertake new challenges and technologies.
2. RF Designer
Responsibilities and Qualifications:
• Extensive RF circuit design in the 1-6GHz frequency range
• Comfortable with the PHY and MAC layer aspects of 802.11 WLAN standards
• Familiarity and exposure to digital and low frequency analog design
• Knowledge and use of analog and RF simulation tools (i.e.; Agilent ADS, MathCAD, HSPICE)
• Comfortable using industry standard circuit schematic and layout CAD tools
• Strong practical knowledge of circuit testing and characterization techniques
• Board level design, functional and parametric test
3. Product Verification Specialist
Responsibilities and Qualifications:
• Previous experience working on wireless or IP networking products
• Strong and structured investigative and debugging skills
• Exposure to test tools, automation development
• IP networking test tools such as IXIA, Smartbits and Agilent
• Wireless test tools such as: Airopeek, Azimuth, Ekahau, OminSpectrum, Veriwave
• Test automation development: TCL, Java, Junit, Python
• IP and wireless protocols
4. Embedded Software Designer
Responsibilities and Qualifications:
• Multi-radio product software feature development
• Advanced knowledge of C and Real Time Operating Systems (eLinux, VxWorks, etc)
• Experience with radio MAC layer and/or associated wireless protocols
• Wide ranging data communication experience covering aspects of layer 2 and layer 3 IP networking.
• Experience in developing OAM software layers (CLI, HTTP, SNMP, embedded databases)
• Ability to work closely with hardware verification environments
• Experience with end to end software development including s/w specification, design methodologies and processes, and design for testability