求教：如何拆开Monarch (stonebridge) 厨房水龙头

[moose]

The faucet(looking like the same as the one shown in the following link) has been used for 5 years and started leaking so I tried to open and fix it myself. However, I tried all my tools(e.g. screwdrivers, allen keys...) but could not find the right tool to loose the screw. Anyone can tell me how to do it?
Thanks a lot

http://www.globalindustrial.ca/p/pl...gclid=CPSV1d3Tl7oCFWJlMgodhzUATw&gclsrc=aw.ds

 

[dole]

I think there's a screw under the 'hot/cold' water marker.

 

[Patio]

你是要卸把手下来吗？那肯定是用Allen Keys，不过合适的尺寸是必须的，尤其是英制和米制必须一致。我有一套Allen keys，但正好不在家里，周6可以拿回来，你可以过来取。Moen的配件是终生包换的，给Moen客服打个电话问一下。

 

[moose]

I think there's a screw under the 'hot/cold' water marker.

That's the exact screw that I tried but cannot take it out as I do not have the correct tool.

 

[moose]

你是要卸把手下来吗？那肯定是用Allen Keys，不过合适的尺寸是必须的，尤其是英制和米制必须一致。我有一套Allen keys，但正好不在家里，周6可以拿回来，你可以过来取。Moen的配件是终生包换的，给Moen客服打个电话问一下。

just check Moen's website and found it seems I need 7/64" hex wrench to disassemble it.

 

[beijing2008]

just check Moen's website and found it seems I need 7/64" hex wrench to disassemble it.

我有工具。 已QQH你。

 

[ccc]

 

[moose]

Thanks for the video. I saw it before. But I have not disassembled my faucet yet so not sure abouth the problem casue leaking. I think I need to replace some parts. Actually the leaking started two years ago but not serious so I was too lazy to fix it. Now it's getting worse and worse and water drops under the sink so I have to fix it asap.
Will borrow the tool from "patio" this weekend to see if I can fix it. Thank you patio too!