连接室外水龙头的铜管裂缝

torjob

知名会员
注册
2007-12-10
消息
62
荣誉分数
29
声望点数
128
裂缝有3~4cm长,可以修嘛?怎么样修?
 

附件

  • IMG_20160815_084534.jpg
    IMG_20160815_084534.jpg
    133.2 KB · 查看: 218
  • IMG_20160815_084625.jpg
    IMG_20160815_084625.jpg
    127.9 KB · 查看: 206
最后编辑:
DIY:
1. shut off the main
2. go to home depot, show the pic to shop assistant in the plumbing sector, buy materials (cutter,connector, fire) and check youtube, then you can diy

or call pluming,
 
如果将这一段铜管全部(从PEX管口到水龙头)换掉会不会简单些呢?谢谢。
 
如果将这一段铜管全部(从PEX管口到水龙头)换掉会不会简单些呢?谢谢。
你那个铜管实际可能就是水龙头(根据照片猜测),裂了就是结冰涨的。所以去HD买个同样的outdoor faucet换上就行了。
用刀从PEX管处切开就行,室外水龙头把密封的Silicon去掉就可以从外头拿出去了。
 
I have the same problem before. Yes, it's part of the frost-free faucet. Just repace the whole thing. Make sure you buy the same length one. And always remember to drain the water in it before winter.
 
楼上两位说的对,就是因为去年冬天之前没有及时排水。如果切开PEX管,PEX管就会变短了,得买长一些的faucet吧?除了切开PEX管,有没有别的办法?
 
楼上两位说的对,就是因为去年冬天之前没有及时排水。如果切开PEX管,PEX管就会变短了,得买长一些的faucet吧?除了切开PEX管,有没有别的办法?
只能换水龙头,短了1寸不会有什么影响,PEX管也有伸缩性。
 
后退
顶部