最初由 bill 发布
It was said that tis should be okay, but the PC133 will work as same as Pc100 at 133 MHZ , is it true, anyone can confirm it?
Thanks
最初由 qwer 发布
sdram有buffered and unbufferd, x64 and x72之分,
通常的电脑用unbuffered and x64,
PC133 的用于 PC100的电脑一般可以,
但有些太旧的电脑不支持比较大的内存,(4xformat)
比如我的电脑不支持256MB单面,
因为用的是256mb以上的芯片组装的,
如果不清楚,可以去查主板的说明书,
或去芯片厂的网站去查,
比如samsung, micron,等。
最初由 bill 发布
Thanks a lot.
I check HP's web, and found the info of my PC model as below, it looks not support the PC133, :-( right?
Memory
Component Attributes
RAM (standard) 64 MB SDRAM standard
Maximum 256 MB (2 x 128 MB DIMM)
Speed 100 MHz synchronous
Sockets Two 168-pin DIMMs
Size 16, 32, 64, and 128 MB DIMMs
Type Supported
SDRAM, 100 MHz, Intel PC SDRAM unbuffered DIMM specification, revision 1.0 compliant