我这边不可以设置port模式,只有pasv模式,我改了 但是会出现一下的情况
The connection failed due to an error or timeout.
1) Verify that the destination host name or IP address is correct.
2) Increase the connection timeout threshold under Global Settings | Connection.
3) Switch to the opposite data connection type (PASV or PORT) under Site Settings | Type tab.
或者
The server forcibly closed the connection.
This normally results from a loss of the connection due to a timeout or a server reboot.
1) Try connecting to the server again later.
2) Verify that the problem is not local by trying to connect to an alternate server.
总之就是没有一个可以连的上的