I bought it last week, and burned severl discs already, it seems work well.
Now the problem is it cannot finishing reading single DVD disc (even the one I just bought). I use dvd decrypter, and got the following error:
I/O Error!
Device[1:0:0] Pioneer DVD-RW DVR-108 1.10 (E
(ATA)
ScsiStatus: 0x02
Interpretation: Check Condition
CDB: 28 00 00 00 03 9E 00 00 01 00
Interpretation: Read(10)- Sector:926
Sense Area: 70 00 04 00 00 00 00 0E 00 00 00 00 08 03 00 00 00 00 00 00 00 00
Interpretation: Logical Unit Communication CRC Error (Ultra-DMA/32)
Same spot if I try late. But I can read it on an old laptop DVD drive.
BTW, I check the device manager, it is set to
DMA mode.
Not sure if it the drive's fault
Now the problem is it cannot finishing reading single DVD disc (even the one I just bought). I use dvd decrypter, and got the following error:
I/O Error!
Device[1:0:0] Pioneer DVD-RW DVR-108 1.10 (E
(ATA)ScsiStatus: 0x02
Interpretation: Check Condition
CDB: 28 00 00 00 03 9E 00 00 01 00
Interpretation: Read(10)- Sector:926
Sense Area: 70 00 04 00 00 00 00 0E 00 00 00 00 08 03 00 00 00 00 00 00 00 00
Interpretation: Logical Unit Communication CRC Error (Ultra-DMA/32)
Same spot if I try late. But I can read it on an old laptop DVD drive.
BTW, I check the device manager, it is set to
DMA mode.
Not sure if it the drive's fault
