请教:

[MountainSunlight]

请教:老黑 or anyone can help，

How are you today?

I have rims of 15x5.5'' JJ with 5 bolts (holes). Could please help me to find these rims can be used for which cars or trucks? Or, please tell me where I can find this information?

Thank you so much!

 

[kevio180]

you need to find out the bolt patten, 5x100 or 5x112.5? Then you will know what fits.

 

[MountainSunlight]

最初由 kevio180 发布
you need to find out the bolt patten, 5x100 or 5x112.5? Then you will know what fits.

Thank you for the reply.

Could please tell me what is bolt patten, 5x100 or 5x112.5? Those are steel rims. All numbers on the rim are: 15x5-1/2 JJ *104 M5 9 11 20 79 Z F (* here is a symbol as an upside T)

I measured the hole diameter is 17mm, the longest two holes distance, from hole outside to outside, is 15cm; the longest two holes distance, from hole centre to centre, is 5-1/4’’; the shortest two holes distance, from hole centre to centre, is 3-1/4”. Are those numbers useful to know the bolt patten?

If know the bolt patten, how can find these rims can be used for which cars or trucks?

Thank you again.

 

[kevio180]

from the edge of a hole, skip one and measure to the center of the other hole, then that should be the number for the bolt patten

 

[kevio180]

Are you trying to sell these? Or do you know what car it came off of? Usaully when you know the bolt patten you kinda know what cars, you can search on the net for which cars but most 5x100 are most VW, 5x112 most audis and acura s, 5x120 most bmws. 15 inch don't normally go on a truck so most likly it came off a car.

 

[kevio180]

My guess, based on serach on the net, I would say its a 5x114.3, but its just a guess, do the measuring.

 

[MountainSunlight]

Thank you for all above.

? I measured 12.5cm from inside edge of a hole, skip one and measure to the center of the other hole; and 14cm from outside edge of a hole, skip one and measure to the center of the other hole (those are the longest distance between two holes).

Those rims are someone left at my garage two year ago before he back to China. Recently he asked another person pass a message to sell it.

Thank you so much. I learned what is the bolt Patten.

So, with the numbers above, can you determine the rims can be used for which cars?

Thanks again!

 

[kevio180]

You know what, I still don't know. What you can do is take it to a tire shop and just sell it to them for some cash. Or if you want to wait a little I will ask my mechinic buddys see if they know how to measure it, I get back to you some time next week.

 

[MountainSunlight]

最初由 kevio180 发布
You know what, I still don't know. What you can do is take it to a tire shop and just sell it to them for some cash. Or if you want to wait a little I will ask my mechinic buddys see if they know how to measure it, I get back to you some time next week.

Thank you so much! You took a lot of time for my question.

Today, I went to WarMart. One staff helped me to find the information. I went Canadian tire before but no help there.

This rim bolt Patten could be 5-1/2”
It could be used for:
Suzuki X90 (97-05)
Samurai (87-93)
Asuma ? Sunruner (92-99)
Sidekick (87-05)
Tracker (90-05)
GEO Tracker (89-99)
GEO Truck (98)
Chevrolet Truck (98)
Etc. ………..

Thank you again and have a good weekend.