开个帖子关注boxing day前后好的工具deal

[balladmonger]

刚看了一下CT的boxing－day－flyer，就有一套Mastercraft Maximum 49-pc socket set，70％off现价65.99还不错。要是能参加26号的活动
spend more than 60$get 15$promo card，还不错。

 

[balladmonger]

考，不过好像感觉这个原价没有200多，这里的商家也会先提价再打折？

 

[hwd2000]

考，不过好像感觉这个原价没有200多，这里的商家也会先提价再打折？

CT老干这事情了，而且是一旦提价就不降了，非要等着打折的时候价格才合理。不过这年头，由于贬值一年是一年的价格，不好比较。

 

[balladmonger]

http://www.canadiantire.ca/AST/brow...+Socket+Set,+20-Pc.jsp?locale=en#BVRRWidgetID

I bought one yesterday. It looks a good deal.

 

[hwd2000]

http://www.canadiantire.ca/AST/brow...+Socket+Set,+20-Pc.jsp?locale=en#BVRRWidgetID

I bought one yesterday. It looks a good deal.

你修车吗？这东西如果不修车，没用。如果修车，又分Imperial和Metric，non impact和impact。

 

[balladmonger]

so far I only need the 17mm socket to install/uninstall the winter tires because I already have one 1/2'' drive handle. Also I can use it for casual works.

 

[hwd2000]

so far I only need the 17mm socket to install/uninstall the winter tires because I already have one 1/2'' drive handle. Also I can use it for casual works.

这种shallow socket安装轮胎不行，要deep socket。另外还需要一个1/2的break bar加一个torque wrench。

 

[Country on wheel]

这种shallow socket安装轮胎不行，要deep socket。另外还需要一个1/2的break bar加一个torque wrench。

谁看见有这套换雪胎的工具大减价喊一声。特别是有磅数的torque wrench。

 

[balladmonger]

这种shallow socket安装轮胎不行，要deep socket。另外还需要一个1/2的break bar加一个torque wrench。

why need deep socket?

I do have a 1/2 break bar

 

[hwd2000]

why need deep socket?

I do have a 1/2 break bar

The normal hex socket is not secure enough to hold the whole lug due to its length and depth of the hole on the rim. Also the wall of the socket is too thin to sustain the 80lb/ft or higher torque.

 

[yjing]

What's wrong to use with the tool come along with the car? I always use it. No torque indication though.

 

[29181]

What's wrong to use with the tool come along with the car? I always use it. No torque indication though.

Nothing wrong with it. But if you use torque wrench, then sockets will be required.

 

[29181]

谁看见有这套换雪胎的工具大减价喊一声。特别是有磅数的torque wrench。

这得单买，前一阵torque wrench有打折呀，45% off.

 

[balladmonger]

The normal hex socket is not secure enough to hold the whole lug due to its length and depth of the hole on the rim. Also the wall of the socket is too thin to sustain the 80lb/ft or higher torque.

短的也没问题的，随车带的就是短的。承受80也没问题的