TheOneAndOnly
Moderator
- 注册
- 2002-10-27
- 消息
- 7,067
- 荣誉分数
- 1
- 声望点数
- 168
http://www.syeager.org/300d/forum/index.php?showtopic=110
UnDutchables V0.1.0
The Wasia firmware already contained:
- ISO 3200
- Mirror Lock up for Timer and Single shot
- Selectable pause for mirror lock up see C.Fn. 17
- FEC on JUMP button
- 'Left' button selects the autofocus mode:
AF OS - ONEShot
AF SE - AI-Servo (doesn't work right now)
AF AI - AI-Focus
- the default button in delete prompt was changed from 'Cancel' to 'OK'. So, be aware.
Now if you want to delete an image, press DEL button and then SET once. To Cancel press any other key.
Added functionality by the UnDutchables
--------------------------------------------------
Continues Drive in Basic Mode
Jump = FEC only selectable in Creative modes
Left key = AF-Mode only selectable in Creative modes
WB selection in Basic modes
Custom Function 1 available in basic modes enabling:
- Quality Select via SET button, this means that RAW can be set in basic modes.
- Parameter select via SET buttons
- Menu via SET button
- Image Replay via SET button
Working, but settings have to be changed in via Advanced mode
----------------------------------------------------------------------
WB-Bracketing
Notes:
1) Changing Quality from RAW in Basic mode may crash the camera. Nothing serious just turn the camera OFF and ON again. Changes must be made in a Creative modes or via the SET button + Custom Function-1 (see 10D manual page 166).
2) If the AF drive is set to AI-Servo the AF confirmation Ligh and Beep are turned off (as done in the 10D) but now it is turned off for all ALL modes. Please change to AI-Focus or One-Shot if AF confirmation Light and Beep is desired.
3) You can upgrade this firmware from either the Canon 1.1.1 or the Wasia B7.1 version without need to reset the firmware or the custom function values.
UnDutchables V0.1.0
The Wasia firmware already contained:
- ISO 3200
- Mirror Lock up for Timer and Single shot
- Selectable pause for mirror lock up see C.Fn. 17
- FEC on JUMP button
- 'Left' button selects the autofocus mode:
AF OS - ONEShot
AF SE - AI-Servo (doesn't work right now)
AF AI - AI-Focus
- the default button in delete prompt was changed from 'Cancel' to 'OK'. So, be aware.
Now if you want to delete an image, press DEL button and then SET once. To Cancel press any other key.
Added functionality by the UnDutchables
--------------------------------------------------
Continues Drive in Basic Mode
Jump = FEC only selectable in Creative modes
Left key = AF-Mode only selectable in Creative modes
WB selection in Basic modes
Custom Function 1 available in basic modes enabling:
- Quality Select via SET button, this means that RAW can be set in basic modes.
- Parameter select via SET buttons
- Menu via SET button
- Image Replay via SET button
Working, but settings have to be changed in via Advanced mode
----------------------------------------------------------------------
WB-Bracketing
Notes:
1) Changing Quality from RAW in Basic mode may crash the camera. Nothing serious just turn the camera OFF and ON again. Changes must be made in a Creative modes or via the SET button + Custom Function-1 (see 10D manual page 166).
2) If the AF drive is set to AI-Servo the AF confirmation Ligh and Beep are turned off (as done in the 10D) but now it is turned off for all ALL modes. Please change to AI-Focus or One-Shot if AF confirmation Light and Beep is desired.
3) You can upgrade this firmware from either the Canon 1.1.1 or the Wasia B7.1 version without need to reset the firmware or the custom function values.
