[请教] IPConfig 的问题

[老兵新手]

为什么在命令行输入 ipconfig. 系统只显示:
Windows XP IP Configuration
就完了. 而不显示我想看到的 IP Address 等?

 

[cable4sale]

cmd then ipconfig

 

[老兵新手]

就是在 CMD 这里输入的。系统只有一行信息现示：
“Windows XP IP Configuration”

 

[陪你去看龙卷风]

make sure your NIC is installed

 

[mamaomao]

start>run>type"cmd",click ok>type "ipconfig"

 

[陨石]

ipconfig /all

 

[老兵新手]

最初由 陪你去看龙卷风 发布
make sure your NIC is installed

What is the NIC?

I have been using internet. Two days ago, the network sudenly didn't work. I found the 'ipconfig' didn't work either when I troubleshoot the network problem.

 

[陪你去看龙卷风]

最初由 洋插队 发布


What is the NIC?

I have been using internet. Two days ago, the network sudenly didn't work. I found the 'ipconfig' didn't work either when I troubleshoot the network problem.

NIC = Network Interface Card
(网卡)
先到硬件管理器里头寻找网卡
看看是否是网卡问题
然后再看网络邻居里头是否有本地连接存在

 

[老兵新手]

谢谢龙卷风. 是 Modem 被 disable 了. 已经 enable. 工作了.

 

[胖蹄阿克]

最初由 洋插队 发布
谢谢龙卷风. 是 Modem 被 disable 了. 已经 enable. 工作了.

呵呵,下次你等system tray上面网络连接成功的图标出现了再ipconfig

 

[ashvalley]

最初由 洋插队 发布
谢谢龙卷风. 是 Modem 被 disable 了. 已经 enable. 工作了.

dia-up modem or from rogers or sympatico?
how could you disable rogers modem?

 

[阿搜]

楼上好多大侠说的都对。
要先进CMD，然后才能IPCONFIG
IPCONFIG/ALL显示所有详细休息；

以下命令在有些情况比如FIREWALL的时候可能不能用；
IPCONFIG /RELEASE释放IP地址；
IPCONFIG /RENEW重获IP地址；

或者在SYS TRAY里面双击网络连接，也可以看到IP地址。

如果是用ROGERS的CABLE MODEM，在使用USB连接的时候才能识别出CABLE MODEM,
否则和CABLE MODEM无关，只能DISABLE/ENABLE网络连接或者NIC才能断开和连接。

ADSL的情况是一样的。

当然如果中间再接个ROUTER就看到看不到任何MODEM了。

 

[老兵新手]

最初由 胖蹄阿克 发布

呵呵,下次你等system tray上面网络连接成功的图标出现了再ipconfig

我用的 Rogers 的 Cable. 连接成功不成功都不在 System Tray 里显示什么。

 

[老兵新手]

最初由 ashvalley 发布


dia-up modem or from rogers or sympatico?
how could you disable rogers modem?

Is was not I who disabled the Modem. That was where network was wrong. Something else made it disable.

But you can disable it by yourself in Control Panel-->Network Connection.

 

[ashvalley]

最初由 洋插队 发布


我用的 Rogers 的 Cable. 连接成功不成功都不在 System Tray 里显示什么。

i use Rogers Modem too,the modem was on at all the time,
i do not know how to disable the modem,i could to disable the NIC, not the modem.