新硬盘装好,但是可用盘符没有D,E, F, G,H

安装的时候,设置C盘的大小,
剩下的空间,等到系统装好后
去disk management,
再create D:E:F:wahtever 盘you want。。
 
对,win7自带这个工具挺好用。只是当时没有理解那几个盘符为什么缺失了。

安装的时候,设置C盘的大小,
剩下的空间,等到系统装好后
去disk management,
再create D:E:F:wahtever 盘you want。。
 
恭喜你, 正朝着挨踢nerd的方向发展。 :p:D
有那个趋势。昨天知道了怎么把硬盘从机箱里整出来。下一步,有空卸显卡,以后就可以自己升级电脑了,省钱。:D
 
Win7 自带的那个Shrink 功能有缺陷,在分区C盘(系统盘)时,最多只让分出一半的空间。
我刚买的机器1TB全在C盘上,想把C盘只保留100G,其它的留给D,E盘符,Windows Shrink无法搞定。
后来用EASEUS Partition Master办到了,很好用。
 
Same here. Hitachi 1TB?
你可以在C的基础上再分,你试试。
不过我还真不知道有这种缺陷。
我刚分了区。

Win7 自带的那个Shrink 功能有缺陷,在分区C盘(系统盘)时,最多只让分出一半的空间。
我刚买的机器1TB全在C盘上,想把C盘只保留100G,其它的留给D,E盘符,Windows Shrink无法搞定。
后来用EASEUS Partition Master办到了,很好用。
 
Same here. Hitachi 1TB?
你可以在C的基础上再分,你试试。
不过我还真不知道有这种缺陷。
我刚分了区。

yeah, the same hard disk.

我记得当时分出500G后,C盘就无法在让我继续Shrink了。不是想当然的1TB->500G->250G。。。

现在已经用我说的那个软件搞定了。目前C盘就留100G。
 
I just tried but failed just like you said. Stupid functionality or just special consideration?

yeah, the same hard disk.

我记得当时分出500G后,C盘就无法在让我继续Shrink了。不是想当然的1TB->500G->250G。。。

现在已经用我说的那个软件搞定了。目前C盘就留100G。
 
That's Cavin, not me. :D
I am ok to have 400 G for C:, but that's a little inefficient, right?

I should have assigned a smaller size to C: while intalling the win7 if I knew I could do that.


100G for C is too small. MS helps to prevent it.
 
新硬盘装好,但是可用盘符没有D,E, F, G,H

电脑目前只有一个硬盘驱动C:,在shrink的时候发现,没有盘符D:到H:
请问可以找回来吗?
Thx

right click Computer on desktop -> Manage -> Storage -> Disk Management -> right click the HD。然后你就知道怎么做了。
 
That's Cavin, not me. :D
I am ok to have 400 G for C:, but that's a little inefficient, right?

I should have assigned a smaller size to C: while installing the win7 if I knew I could do that.


知道是他。不是懒得理嘛。
 
right click Computer on desktop -> Manage -> Storage -> Disk Management -> right click the HD。然后你就知道怎么做了。


不是每个人的 desktop 上都有 Computer 的。
 
哈哈哈,你们谁在忽悠谁啊。
笑塌了,哈哈哈哈。
接着来。

没有?

Display Properties -> Desktop -> Customize Desktop -> check 'My Computer', OK
 
后退
顶部