现在有3000以内能买的到sub 100 micron的3D打印机吗？
- 主题发起人 苦逼热狗
- 开始时间
- 注册
- 2011-02-04
- 消息
- 5,951
- 荣誉分数
- 991
- 声望点数
- 173
又长知识了，这3D printing目前是不就是玩的？
http://www.shapeways.com/blog/archi...3D-Printed-Products-of-2012-on-Shapeways.html
我喜欢那个mobius strip 和Inception
http://www.shapeways.com/model/683524/super-mario-mobius-strip.html
http://www.shapeways.com/blog/archi...3D-Printed-Products-of-2012-on-Shapeways.html
我喜欢那个mobius strip 和Inception
http://www.shapeways.com/model/683524/super-mario-mobius-strip.html
附件
太多了， 不过我觉得这个3D Printer是个Hype。 Milling Machine也可以做出很多产品。谁没事买Milling Machine? 只有Hobbyists。
http://shop.ultimaker.com/
http://www.bitsfrombytes.com/
http://www.mauk.cc/
http://www.fabathome.org/
http://shop.ultimaker.com/
http://www.bitsfrombytes.com/
http://www.mauk.cc/
http://www.fabathome.org/
- 注册
- 2002-10-12
- 消息
- 47,111
- 荣誉分数
- 2,376
- 声望点数
- 393
真心不多，对比一下吧
MakerBot Replicator 2 100 microns $2200
Ultimaker 用的是MakerBot Replicator 1的OpenSource 125 microns 1200 euro
BFB 3D Touch Printer single head 125 microns $3490
Mauk CartesioM 冷却以后 100 microns 税前1450 euro
第4个link已经挂了..........
都不是sub 100 micron的啊........
不是sub 100 micron的话，我可以买国内的MBot代工就好了，5000人民币不到。
我说的sub 100 micron是formlab这类的精细程度啊......
http://www.kickstarter.com/projects/formlabs/form-1-an-affordable-professional-3d-printer
你说的sub 100 micron是要求x,y axis?
From FAQ:
How accurate is the machine? The Ultimaker has the highest detail in the Z-direction of all 3D printers that use the same printing process, even those of up to 100,000 euros. It can lay down the material with a precision better than 0.1mm. However, the minimum size of a feature is limited by the nozzle size and settings that you choose. With practical settings, the features are almost always bigger than 0.5 mm, so thinner walls are not really possible. The resolution in the vertical direction is lower, because it uses a static layer height. The Ultimaker can print layers of 20 micrometers (which is less than 0.0008 inches). You can keep this in mind when deciding in which orientation you want to print your part.
THE FORM 1
3D PRINTER
An end-to-end package. Printer, software, and post-processing kit that just works. Right out of the box.
Min. Feature
300 microns
(.012 inches)
Min. Layer Thickness
25 microns
(.001 inches)
From FAQ:
How accurate is the machine? The Ultimaker has the highest detail in the Z-direction of all 3D printers that use the same printing process, even those of up to 100,000 euros. It can lay down the material with a precision better than 0.1mm. However, the minimum size of a feature is limited by the nozzle size and settings that you choose. With practical settings, the features are almost always bigger than 0.5 mm, so thinner walls are not really possible. The resolution in the vertical direction is lower, because it uses a static layer height. The Ultimaker can print layers of 20 micrometers (which is less than 0.0008 inches). You can keep this in mind when deciding in which orientation you want to print your part.
THE FORM 1
3D PRINTER
An end-to-end package. Printer, software, and post-processing kit that just works. Right out of the box.
Min. Feature
300 microns
(.012 inches)
Min. Layer Thickness
25 microns
(.001 inches)
