国内买的电器,电压不符,请问要怎样才能在这边使用?

  • 主题发起人 主题发起人 TIFF
  • 开始时间 开始时间
那东西学名叫TRANSFORMER。。。

我在能运两32KG箱子的年代运过一个。。。全是线包,死重:(。。。你扔之前可以考虑一下我:blowzy::D

:dx::dx::dx:
 
等不及了你就自己发动一个核战争。

我会的哦。那天我把一个吃剩的苹果核扔在河边,几只海鸥立刻飞来争抢,核战争就这样爆发了。。。
 
刚才,就在刚才,我从家里两面墙取出了240V电压,应该当220V可以的。
 
刚才,就在刚才,我从家里两面墙取出了240V电压,应该当220V可以的。

wow, 大侠,还是高伏特的:cool:
 
你从他的马甲名还没看出来,给电的。
 
刚才,就在刚才,我从家里两面墙取出了240V电压,应该当220V可以的。



Be careful. In this way, the device is working between two phases of a 3-phase a.c. source. Be sure the device's ground is OK and it does not link to any of those two leads.



Many single phase circuit share the ground and the single phase neutral.



For safety, it's better not use this approach, especially those who not has much knowledge about electricity.



If someone still want to try, an advice is to insert an additional switch to allow you disconnect your device from the ac source completely (both leads discnnected when you turn off the device).



For low power rating devices, a 110 to 220 convert adaptor is not very expensive and is safer.



For the devices >350W, such as hair dryer or cooker, find a similar product designed for 110V source is often a better choice.
 
有图有真相!!
 

附件

  • 截图25.jpg
    截图25.jpg
    42.7 KB · 查看: 94
上面的转换器不错,希望tiff参考,比我说的特制Power Bar要安全多了。
 
一心啊一心,你还真一根筋,你家烧饭的电炉子的插头是4 个脚的,其中一个是地线,那三个就是 每一个上是120伏,插在其中的两根就是240。
 
谢谢热心的人们。你们让我感到,想放弃也不是一件容易的事。我再做一次尝试吧。

这个熨烫机, 额定电压220V, 输出功率1700W,额定频率50HZ。请大侠们帮我选一个合适的电压转换器。 请尽量选小巧玲珑的。如果太大太笨重,我真的不想要。
 
一心啊一心,你还真一根筋,你家烧饭的电炉子的插头是4 个脚的,其中一个是地线,那三个就是 每一个上是120伏,插在其中的两根就是240。

好像是tiff不想那样接。
 
1700W :eek::eek::eek:

Throw it away bah. :D
 
后退
顶部