请教瓷砖上钻孔问题

[dean]

正在厨房铺瓷砖，有冰箱制冰铜管通往地下室。请教一是怎么将铜管从冰箱卸下来。问题二是该铜管处的瓷砖怎么钻孔？先钻孔，还是铺上后再钻孔？谢谢。

 

[Anakin]

有专门的钻瓷砖的钻头，铺上一起钻，不然你怎么对得准孔。卸那个铜管：铜管和冰箱的焦管间有个自涨螺丝松开就可以了。

 

[没有网名]

先将铜管从冰箱上拆下来，如果不能完全拿掉的话，你只能先将瓷砖钻孔再贴。
实在不行的话，可将瓷砖先破成两半再贴。

 

[dean]

有专门的钻瓷砖的钻头，铺上一起钻，不然你怎么对得准孔。卸那个铜管：铜管和冰箱的焦管间有个自涨螺丝松开就可以了。

I am replace the vinyl with ceramic tile. There is already a hole there for the tube. I just a little worry the ceramic tile may break after it has been laied there.

 

[dean]

先将铜管从冰箱上拆下来，如果不能完全拿掉的话，你只能先将瓷砖钻孔再贴。
实在不行的话，可将瓷砖先破成两半再贴。

Thanks a lot.

 

[没有网名]

I am replace the vinyl with ceramic tile. There is already a hole there for the tube. I just a little worry the ceramic tile may break after it has been laied there.

The hole that is there shouldn't be a problem, because you are going to add more plywood or cement board any way. The added layer should cover the hole.
As long as you use drill bits for tiles, there shouldn't be any problem. Just make sure you drill the hole in stages.

 

[海边人]

学问太多了，为什么要通下去？有什么用处？

 

[没有网名]

学问太多了，为什么要通下去？有什么用处？

冰箱的进水。

 

[babies]

我家也要装这个制冰的水管， 有人帮忙装这个的吗？

 

[Vive]

用冲击钻和特殊钻头（hammer drill）。钻孔的时候，再瓷砖上贴上胶布防止钻头滑。

 

[没有网名]

用冲击钻和特殊钻头（hammer drill）。钻孔的时候，再瓷砖上贴上胶布防止钻头滑。

do you want to break the tile or do you want to drill hole? If you want to drill holes, don't use hammer drill.

Drill + drill bit for tiles.

 

[Anakin]

I am replace the vinyl with ceramic tile. There is already a hole there for the tube. I just a little worry the ceramic tile may break after it has been laied there.

那就铺完了从地下室往上转.一个小铜管的孔没大问题的.只要你下面地是平的.

 

[luvmonbora]

很容易在地砖上钻洞的，钻的时候不要用力压，时不时的把钻头取出上点水降温。慢慢来，三五分钟一个洞。贴点胶布在要钻眼的地方，这样开始时比较方便，要用瓷砖用钻头。一般的电转就可以，不要用大马力的。钻过墙上和地板上的瓷砖。