如何更换墙上开关?

小火炉

高级会员
注册
2008-07-03
消息
1,774
荣誉分数
486
声望点数
93
家里墙上开关坏了,原来开关比较复杂(图1),想更换一个简单的(图2),如何正确把线路接到新的开关上,请指教,谢谢!
 

附件

  • 2012-04-09 14.12.42.jpg
    2012-04-09 14.12.42.jpg
    71.8 KB · 查看: 422
  • 2012-04-09 14.13.03.jpg
    2012-04-09 14.13.03.jpg
    109.4 KB · 查看: 408
[media]http://www.youtube.com/watch?v=iBSyJq5eJ-o[/media]
 
家里墙上开关坏了,原来开关比较复杂(图1),想更换一个简单的(图2),如何正确把线路接到新的开关上,请指教,谢谢!

别换简单的啦,这是个3-way。买个新的3-way switch换上,它的说明里面有具体的接法。
 
楼上的别误导人家,这个不是3-way开关。三根线有个绿色的是地线。看这个接法应该是可调亮度的开关。
 
楼上的别误导人家,这个不是3-way开关。三根线有个绿色的是地线。看这个接法应该是可调亮度的开关。

Sorry Chinese input engine is down.

Are you sure? Go check the Ontario Electrical Safety Code Simplified, Page 66.

If you see a 3-wire cable (14/3 or 12/3) in a switch box, most of the time it is a 3-way or 4-way. It could also be a 3-way dimmer.

And, in residential wiring, grounding is ALWAYS the bare wire, not green. Remember this, it may save your life down the road:).
 
Sorry I was wrong, I was looking at the switch in the box:mad:. The switch to be removed was hot shown in the picture. If that's the case, connect the ground to the box with a bare wire, connect the hot (black) to one post in the switch and the light (red? I'm colour bland) to the other one.
 
呵呵,中文输入好啦?

升级到windows 7,过去用的软件总出毛病。可是用惯了就不愿意换,只好三天两头地重装:(
 
后退
顶部