如何拆电池？

[happy-g-lucky]

应先拆正极还是负极呢？
谢谢

 

[胡说之]

好象无所谓谁先谁后吧.

 

[happy-g-lucky]

最初由 VIP 发布
好象无所谓谁先谁后吧.

问题应不大， 但有区别。自己刚从网上查了一哈
Safety alert: When replacing a battery -- and any time that you're working under the hood of a vehicle -- wear safety glasses or goggles. Since batteries contain corrosive materials, it's also a good idea to wear gloves.

Steps:

Check your vehicle's manual to find out the type of grounding system your vehicle has. The vehicle in our demonstration used a negative-grounding system.

For a negative grounding system, remove the battery-cable connected to the negative post first (figure D). (For a positive grounding system, remove the positive cable first.) The cable terminal is held in place by a collar tightened and loosened by a nut and bolt. Use two wrenches, working in opposite direction, to loosen the nut. Lift the cable free of the terminal, and tuck it out of the way.

Once the cable has been loosened and disconnected from the negative post, do the same for the positive side (figure E).


With both cables loose, use a ratchet wrench with an extender to loosen the clamp device (figure F) that holds the battery stationery in its place.

详见 http://www.diynet.com/DIY/article/0,2058,7474,00.html