关于自行车链条的问题

[悄悄的吧]

想给自行车换一个链条，
但不知道链条的接口在哪里，
怎么拆，
谁知道，请告诉我一声。

 

[ASICS]

No easy

You have to use a special tool, it costs about 10 bucks. You can find it in any bike shop or Sportchek or MEC.

 

[foc]

仔细从头到尾看一下链条,会发现有一个地方和别的地方不一样,是个可以推出来的销子.用罗丝刀的头把那个销子顶出,来整个链条就段开来了.拆下换上新链条把新链条的销子推回去就成了.

 

[悄悄的吧]

最初由 foc 发布
仔细从头到尾看一下链条,会发现有一个地方和别的地方不一样,是个可以推出来的销子.用罗丝刀的头把那个销子顶出,来整个链条就段开来了.拆下换上新链条把新链条的销子推回去就成了.

没找到，能再说详细点吗？
谢了

 

[ASICS]

最初由 foc 发布
仔细从头到尾看一下链条,会发现有一个地方和别的地方不一样,是个可以推出来的销子.用罗丝刀的头把那个销子顶出,来整个链条就段开来了.拆下换上新链条把新链条的销子推回去就成了.

Most bike chain doesn't have that "销子" as in China. So as I told you, you have to use a special tool. With this tool, you can open the chain from any link. Unfortunately, I forget the name of the tool. Don't worry, it's very easy to figure out how to use the tool once you see it.

 

[ASICS]

To make your work easy, here are several pictures. Hope this helps.

Picture 1 - How does the chain tool look like

 

[ASICS]

Picture 1 - How to use this tool

 

[ASICS]

Sorry, last one should be picture 2.

Picture 3 - How to use the tool (again)

 

[ASICS]

Picture 4 - The chain after you open it

 

[ASICS]

Enjoy your bike. There are lots of fun biking in Ottawa. Cheers!!!

 

[烂土豆]

把后轮卸下来再取出链子可以吗？那工具绝不便宜，不值得。

 

[bill]

最初由 烂土豆 发布
把后轮卸下来再取出链子可以吗？那工具绝不便宜，不值得。

Good Point. Just kidding.

I bet you never did it here.
If you do so, y9ou have to cut the frame first on most of the bikes here.

 

[ASICS]

最初由 烂土豆 发布
把后轮卸下来再取出链子可以吗？那工具绝不便宜，不值得。

Then you have to cut the frame or the chain, you will pay more. I think you can find a cheap one at Canadian Tire, less than $10.

 

[悄悄的吧]

good
thanks alot

 

[foc]

最初由 悄悄的吧 发布



没找到，能再说详细点吗？
谢了

每节链条是由3部分组成,一个8字形的底座,两个短的接头和,两片小的圆接头固定底座和接头.一般圆接头都是不可分开的,但那个销子的地方却是断开的.推出那个销子之后,链条就可以断开.

我在加拿大玩了好几辆自行车了,换链条都用这个办法.没有问题.

没使过那个工具.看上去的好处可能是可以在任何地方断开链条.


祝成功.