NightAngel
3D打印人
- 注册
- 2018-05-23
- 消息
- 7
- 荣誉分数
- 0
- 声望点数
- 1
FDM (fused deposition modeling) 是3D打印的一种。打印的过程是用一种能融化的料采一层一层的放在一个能活动的平面上。3D打印需要XYZ三方向活动。一般的打印机会用打印头管理X和Z方向，和打印平面管理Y方向。
如果您需要建个模型但是不想花时间去做，3D打印可以帮您解决。从小零件，包括custom螺丝螺母，到打印大模型，我都可以帮您解决。我的报价比图书馆里的便宜，只有10分刀1克料。如果您打的多的话，价钱方面可以商量。
打印出来的物件不容易坏，耐高温（80C）和低温（加拿大冬天没问题）。
我还卖现成的模型，看以下模型附图。价钱不一，3刀起。如果不喜欢模型颜色，我可以帮您打一个新的颜色。请电话或邮件详谈。
TEL: 613-315-8158 EMAIL: timelapsemodel@gmail.com 微信：Timelapse3D
Youtube: https://www.youtube.com/channel/UCnuuJLyRzAZavETJEgWWrtA
Fused filament fabrication (FFF) is a 3D printing process that uses a continuous filament of a thermoplastic material. This is fed from a large coil, through a moving, heated printer extruder head. Molten material is forced out of the print head's nozzle and is deposited on the growing workpiece. The head is moved, under computer control, to define the printed shape. Usually the head moves in layers, moving in two dimensions to deposit one horizontal plane at a time, before moving slightly upwards to begin a new slice. The speed of the extruder head may also be controlled, to stop and start deposition and form an interrupted plane without stringing or dribbling between sections. Fused filament fabrication was coined by the members of the RepRap project to give a phrase that would be legally unconstrained in its use, given patents covering fused deposition modeling (FDM).
如果您需要建个模型但是不想花时间去做，3D打印可以帮您解决。从小零件，包括custom螺丝螺母，到打印大模型，我都可以帮您解决。我的报价比图书馆里的便宜，只有10分刀1克料。如果您打的多的话，价钱方面可以商量。
打印出来的物件不容易坏，耐高温（80C）和低温（加拿大冬天没问题）。
我还卖现成的模型，看以下模型附图。价钱不一，3刀起。如果不喜欢模型颜色，我可以帮您打一个新的颜色。请电话或邮件详谈。
TEL: 613-315-8158 EMAIL: timelapsemodel@gmail.com 微信：Timelapse3D
Youtube: https://www.youtube.com/channel/UCnuuJLyRzAZavETJEgWWrtA
Fused filament fabrication (FFF) is a 3D printing process that uses a continuous filament of a thermoplastic material. This is fed from a large coil, through a moving, heated printer extruder head. Molten material is forced out of the print head's nozzle and is deposited on the growing workpiece. The head is moved, under computer control, to define the printed shape. Usually the head moves in layers, moving in two dimensions to deposit one horizontal plane at a time, before moving slightly upwards to begin a new slice. The speed of the extruder head may also be controlled, to stop and start deposition and form an interrupted plane without stringing or dribbling between sections. Fused filament fabrication was coined by the members of the RepRap project to give a phrase that would be legally unconstrained in its use, given patents covering fused deposition modeling (FDM).
