Homer进来
- 主题发起人 假道学
- 开始时间
- 注册
- 2002-01-16
- 消息
- 22,826
- 荣誉分数
- 127
- 声望点数
- 243
我的router是SMC的，连rogers.
我先用一台电脑A连上rogers，确保正常。然后把router加进来。
wwww的话，router不用座任何设置（除了把A的网卡MAC地址拷贝到router上）
MSN我查了微软的资料，只有XP内嵌一种软件可以通过router进行语音通讯。文件传输有人试成功过，但我不知道它是怎么摄制的，至于即时消息，MSN是通过IE走的，所以IE正常，MSN的这个功能也就应该正常。
netmeeting我可以用，要开放很多端口。等一下我去帮你找找网页连接。
我先用一台电脑A连上rogers，确保正常。然后把router加进来。
wwww的话，router不用座任何设置（除了把A的网卡MAC地址拷贝到router上）
MSN我查了微软的资料，只有XP内嵌一种软件可以通过router进行语音通讯。文件传输有人试成功过，但我不知道它是怎么摄制的，至于即时消息，MSN是通过IE走的，所以IE正常，MSN的这个功能也就应该正常。
netmeeting我可以用，要开放很多端口。等一下我去帮你找找网页连接。
Thanks!
我的router也是SMC的，(SMC Broadband 4-Port 10/100 Router)，昨天买的，$49.99。价格是否贵了?
http://www.futureshop.ca/catalog/pr...-web3&biasid=8E0F3672B8904CA6BD46A627D70EB752
MSN Messenger可以用，但时断时续。后来开放了一些端口，似乎好了。语音和Netmeeting还没有试，因为说明书(help)上说的不明白，不知道端口怎么设( IN TCP 5901, IN UDP 5900-5901, etc.)
我也是用的Rogers High-speed.
现在www和ftp服务可以用了，但我开放了TCP 80,79,21,20端口，不知道是否安全?
我的router也是SMC的，(SMC Broadband 4-Port 10/100 Router)，昨天买的，$49.99。价格是否贵了?
http://www.futureshop.ca/catalog/pr...-web3&biasid=8E0F3672B8904CA6BD46A627D70EB752
MSN Messenger可以用，但时断时续。后来开放了一些端口，似乎好了。语音和Netmeeting还没有试，因为说明书(help)上说的不明白，不知道端口怎么设( IN TCP 5901, IN UDP 5900-5901, etc.)
我也是用的Rogers High-speed.
现在www和ftp服务可以用了，但我开放了TCP 80,79,21,20端口，不知道是否安全?
- 注册
- 2002-01-16
- 消息
- 28,436
- 荣誉分数
- 5,435
- 声望点数
- 393
Q: MSN - Microsoft Network (#2087) (back)
A: + The 7004BR and 7008BR.
To configure your network for voice communications and file transfer using MSN. (this is extract from MSN site)
======================================================
This topic describes the settings that MSN Messenger Service uses for voice communications and file transfer. Perhaps they will be useful to you in configuring your firewall or proxy server.
For voice communications MSN Messenger Service establishes an outgoing TCP connection from port 6901 for all voice communications.
In the case of computer-to-computer communications, the call recipient also uses TCP port 6901.
In the case of computer-to-phone communications, the TCP destination (Net2Phone) port is between 7801 and 7825.
All voice traffic also uses UDP packets. The user's computer sends and receives UDP packets at port 6901.
The Net2Phone service sends and receives UDP packets using ports 6801, 6901, and 2001 to 2120.
For file transfer Both incoming and outgoing TCP connections use this range of ports: 6891 to 6900. This allows up to 10 simultaneous file transfers per sender. If you open only Port 6891, users will be able to do only one file transfer at a time.
The TCP ports need to be configured so that sockets on a port remain open for extended periods of time.
To allow your network users to have a direct connection to instant messaging services, you will need to:
Open outgoing TCP connections to Port 1863 on your proxy servers. Let your network users know which kind of proxy server your network uses HTTP, SOCKS4, or SOCKS5) and provide them with the corresponding details (server name, port number, and so forth) so they can enter that information on the Connection tab of the Options dialog box (Tools, Options). Make sure the internal local area network has access to the Domain Name System (DNS) servers to resolve the names of external hosts such as messenger.msn.com.
+ The ABR.
Special Application Page:
Enable the following trigger ports:
6901 TCP
6901 UDP
6891 TCP
1863 TCP
Enable the following public ports:
6901 TCP
6891 TCP
1863 TCP
A: + The 7004BR and 7008BR.
To configure your network for voice communications and file transfer using MSN. (this is extract from MSN site)
======================================================
This topic describes the settings that MSN Messenger Service uses for voice communications and file transfer. Perhaps they will be useful to you in configuring your firewall or proxy server.
For voice communications MSN Messenger Service establishes an outgoing TCP connection from port 6901 for all voice communications.
In the case of computer-to-computer communications, the call recipient also uses TCP port 6901.
In the case of computer-to-phone communications, the TCP destination (Net2Phone) port is between 7801 and 7825.
All voice traffic also uses UDP packets. The user's computer sends and receives UDP packets at port 6901.
The Net2Phone service sends and receives UDP packets using ports 6801, 6901, and 2001 to 2120.
For file transfer Both incoming and outgoing TCP connections use this range of ports: 6891 to 6900. This allows up to 10 simultaneous file transfers per sender. If you open only Port 6891, users will be able to do only one file transfer at a time.
The TCP ports need to be configured so that sockets on a port remain open for extended periods of time.
To allow your network users to have a direct connection to instant messaging services, you will need to:
Open outgoing TCP connections to Port 1863 on your proxy servers. Let your network users know which kind of proxy server your network uses HTTP, SOCKS4, or SOCKS5) and provide them with the corresponding details (server name, port number, and so forth) so they can enter that information on the Connection tab of the Options dialog box (Tools, Options). Make sure the internal local area network has access to the Domain Name System (DNS) servers to resolve the names of external hosts such as messenger.msn.com.
+ The ABR.
Special Application Page:
Enable the following trigger ports:
6901 TCP
6901 UDP
6891 TCP
1863 TCP
Enable the following public ports:
6901 TCP
6891 TCP
1863 TCP
- 注册
- 2002-01-16
- 消息
- 22,826
- 荣誉分数
- 127
- 声望点数
- 243
站长大人，这些我以前都试了，不成功。你的MSN Messenger能语音通信吗？
50块一点都不贵，前一段日子也是这个特价，现在又卖这个价钱了，我本来还想发个贴子告诉大家一声，想不到你已经买玩了。开这么多端口，我也有些担心，但我不是专家，也不太明白，谁爱黑我谁就来吧，我这也没有商业机密。
这里有netmeeting的设置：
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q158623
50块一点都不贵，前一段日子也是这个特价，现在又卖这个价钱了，我本来还想发个贴子告诉大家一声，想不到你已经买玩了。开这么多端口，我也有些担心，但我不是专家，也不太明白，谁爱黑我谁就来吧，我这也没有商业机密。
这里有netmeeting的设置：
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q158623
