最初由 丫丫 发布
By adding the plastic film, it generate an air gap to act as insulation so that the big difference on both side of the window glass is slowed down to 2 steps. The condensation problem should be solved.
If the plastic film is not taped air-tight, it won't function well for sure, since there still direct air, with moisture and heat, exchange in and out the film.
Or, if there were ice or condensation left on the glass before the film was put on, it could be sealed in there for the whole winter
So, tear the film, clean the window, blow dry with your hair dryer if necessary, and tape the film as tight as possible
BTW, as I said, humidity in your house is too high ...:smokin:
最初由 丫丫 发布
If the plastic film is not taped air-tight, it won't function well for sure, since there still direct air, with moisture and heat, exchange in and out the film.
So, tear the film, clean the window, blow dry with your hair dryer if necessary, and tape the film as tight as possible
BTW, as I said, humidity in your house is too high ...:smokin:
最初由 shusheng 发布
我们家有一间房间特冷,也可能是窗户有缝,也可能有别的原因。
有什么科学一点的方法可以找出原因吗?
最初由 渐渐 发布
I still have some condensation on the window after taping the plastic film on the windows.
Is this normal or have I done something wrong?
最初由 haoren1 发布
Rooms located at certain areas of a house may be colder. For example, if this room is on top of your garage, then it can be colder. Another example may be that this room is farther away from the furnice.
You can try to seal your windows with removable calk, called draft stop or something like that, which is available at the Home Depo. You can put it on for the winter and peel it off in summer. If the room is still cold after this, you may need to call professionals to adjust your hot air ducts so more heat is sent to that room.
Good luck.