最初由 不戒 发布
1, buy a dishwaher installation kit from Home Depot (about $20.00)
2, buy or borrow a bit for drilling a hole (between the cabinet board)of at lease one inch in diameter.
3, switch off your master electrical panel.
4, connect the electrical wire to the machine,
5, connect the "IN" to hot water and the OUT to the drain.
6, monitor if there is any leak for a short while.
It should not take you more than one hour
最初由 楚天 发布
高人啊!多谢!最初由 不戒 发布
1, buy a dishwaher installation kit from Home Depot (about $20.00)
2, buy or borrow a bit for drilling a hole (between the cabinet board)of at lease one inch in diameter.
3, switch off your master electrical panel.
4, connect the electrical wire to the machine,
5, connect the "IN" to hot water and the OUT to the drain.
6, monitor if there is any leak for a short while.
It should not take you more than one hour
我这就整去了。。。 :bounce:
最初由 楚天 发布
最初由 不戒 发布
5, connect the "IN" to hot water and the OUT to the drain.
This part is not that easy, at least for me.
You have to shut off the main water supply (hot and cold), and you need the right plumber tools, in short, it involves carpentry, electric and plumbering skill, a lay man like me can't finish the job in one hour. Think about it twice before you start the works.