急等回复：请装过双层窗帘杆（DOUBLE DRAPERY ROD）的朋友介绍经验

[moose]

Just bought many double and single drapery rods from BOUR CLAIRE.
But was told by friends that it is very difficult to install the long double drapery rods as the drywall is not strong enough.

Any friends already installed the double rods that can share experience.
Thanks a lot

 

[爱喝牛奶的wawdj]

用那种带爪钩的螺丝组~

 

[闲哥]

你必须找到DRYWALL下面的木头, 钉在木头上, HOMEDEPOT和CD都有那种工具找木头, 好象叫STUD FINDER. $30左右

 

[胡啦哈]

叫LAZY ANCHOR，就是就是外层是塑料的螺丝钉。把塑料螺丝钉拧进去以后再把金属螺丝钉拧进塑料螺丝钉里去。

最好选择那种带有裂缝的塑料螺丝钉，当金属螺丝钉拧进去以后，塑料螺丝钉便于裂开而和drywall合为一体而不会把金属螺丝钉抱紧。

俺有个小窍门，用细钻头把drywall钻个孔，然后把塑料螺丝钉稍微拧进drywall一点以后拔出来，用钳子把塑料螺丝钉的尖头剪掉，最后再把塑料螺丝钉拧进drywall，这样塑料螺丝钉更容易裂开。这个是俺打出几个废洞以后的出来的经验。哈哈。。。。。

 

[胡啦哈]

你必须找到DRYWALL下面的木头, 钉在木头上, HOMEDEPOT和CD都有那种工具找木头, 好象叫STUD FINDER. $30左右

先头俺也是这样试的。但是发现有木头的地方不一定就适合钉窗帘杆，而且那种找木头的工具不怎么好用。

俺的经验是，不管有没有木头棱子，先定下窗帘杆的位子和需要打孔的位置。在需要打孔的位置用细钻头钻，这样可以100%地判断出打孔的位置下面有没有木头棱子(stub)。如果有木头棱子，就省事了，用普通木螺丝就行了。如果没有钻到木头，就用lazy anchor。

 

[moose]

Thank you for your valuable advise. I just weighed the double rods. The longest one, 1.5meter to 3.05 meter, is about 8 lb which is pretty heavy. I'm not sure if the rod can be secured to the wall even I nailed it to the stud and use the lay anchor.
Any suggestions? Thanks