关于三点调头,当考官下令时,用先打右灯吗?然后在靠边停下
- 主题发起人 sunny76
- 开始时间
- 注册
- 2007-06-14
- 消息
- 8,234
- 荣誉分数
- 64
- 声望点数
- 178
Three-point turn
On narrow roads you need to make a three-point turn to change directions. As shown in Diagram 2-36, a three-point turn starts from the far right side of the road. Make sure you do not make a three-point turn on a curve in the road, on or near a railway crossing or hilltop, or near a bridge or tunnel that blocks your view.
Signal for a left turn. When the way is clear in both directions, move forward, turning the steering wheel sharply left towards the curb on the far side of the road. When you have reached the left side of the road, stop. Shift the vehicle into reverse. Signal a right turn. After checking that the way is still clear, turn the steering wheel sharply to the right, while backing up slowly to the other side of the road. Stop. Shift to forward gear and check traffic. When the way is clear, drive forward.
Diagram 2-36
On narrow roads you need to make a three-point turn to change directions. As shown in Diagram 2-36, a three-point turn starts from the far right side of the road. Make sure you do not make a three-point turn on a curve in the road, on or near a railway crossing or hilltop, or near a bridge or tunnel that blocks your view.
Signal for a left turn. When the way is clear in both directions, move forward, turning the steering wheel sharply left towards the curb on the far side of the road. When you have reached the left side of the road, stop. Shift the vehicle into reverse. Signal a right turn. After checking that the way is still clear, turn the steering wheel sharply to the right, while backing up slowly to the other side of the road. Stop. Shift to forward gear and check traffic. When the way is clear, drive forward.
Diagram 2-36
- 注册
- 2002-03-11
- 消息
- 19,683
- 荣誉分数
- 5,188
- 声望点数
- 373
Yes, you are correct! Before doing that, also check if it is safe to pull over at first, then signal and stop...
