关于购买SAW的问题

[阿搜]

想买一个SAW，日后做点活用，比如cabinet之类的。

想问一下各位师傅，mitre saw和circular saw什么区别？几寸的比较合适？还需要配stand或者table吗？

如果要做cabinet还需要什么工具阿？

现在年底打折很多，有什么deal可以推荐的吗？

多谢。

 

[Beefburger]

circular saws 是这个样子地

miter saw是这个样子滴

miter saw需要一个STAND，做MITER CUT要MITER SAW，其他的都可以用CIRCULAR SAW代替了。毕竟MITER SAW比CIRCULAR SAW贵好多

 

[Beefburger]

CIRCULAR SAW也可以做些MITER CUT，不过有限.你要做什么CABINET?厨房吊柜？

 

[阿搜]

对，要作厨房吊柜。

 

[阿搜]

circular/miter saw, 这样的project，什么尺寸比较合适？

 

[Beefburger]

那东西也能自己做啊 我只能BM参观了 :blink: 。我知识有限，你只能问专业人士了。这类工具干不了这种细活。你去HD找本书，上面会列出你所需要的所有工具。

 

[阿搜]

厨子看看能不能自己做，门可能就买现成的了。上周卸下一个厨，发现特别简单。

 

[Martin]

I have a mitre saw that you can borrow. Also, I have 8J's circular saw you can borrow too.

 

[阿搜]

哦？奈斯。will contact you after new year.

 

[阿搜]

研究了一下，厨柜本身很简单，HD或者RONA直接买板，按照设计尺寸，锯完钉起来就行。看了一下IKEA的橱柜，很便宜，而且东西也有不错的。现在还在考虑怎么弄，没最后定。

因为新买个冰箱，尺寸不合适，需要锯橱柜，又没有ready装修厨房，所以决定自己改装一下现有的cabinet。

 

[blackscraper]

要做cabinet，最好要tablesaw。circular saw does not work。这是本人的教训。

理论上tablesaw最有用。没有tablesaw不能干的事情，

 

[blackscraper]

研究了一下，厨柜本身很简单，HD或者RONA直接买板，按照设计尺寸，锯完钉起来就行。看了一下IKEA的橱柜，很便宜，而且东西也有不错的。现在还在考虑怎么弄，没最后定。

因为新买个冰箱，尺寸不合适，需要锯橱柜，又没有ready装修厨房，所以决定自己改装一下现有的cabinet。

it is easier said than done. if you don't have the right tool, it is pretty difficult to do it professionally. For ex, how would you make sure that your cuts have exactly the same size? What about the finish? Do you know when you use screws to bind the boards together, the joining two boards tend to move so you need some clamp? If u are using dowel join, how do you make sure the two holes are compatible so the boards are aligned? There are many more things to consider. also, if you cut the boards in homedept, precisions are NOT guaranteed. You can see 1/4" difference between cuts, that is unbarable.

 

[阿搜]

good to know these. still researching.

 

[Martin]

good to know these. still researching.

BTW, someone mentioned table saw, I have that too...:blowzy:

 

[ygzhao]

it is easier said than done. if you don't have the right tool, it is pretty difficult to do it professionally. For ex, how would you make sure that your cuts have exactly the same size? What about the finish? Do you know when you use screws to bind the boards together, the joining two boards tend to move so you need some clamp? If u are using dowel join, how do you make sure the two holes are compatible so the boards are aligned? There are many more things to consider. also, if you cut the boards in homedept, precisions are NOT guaranteed. You can see 1/4" difference between cuts, that is unbarable.

君所言甚是，看花容易、绣花难啊。关键是加工精度的问题，这里差一丁点儿、那里差一丁点儿，整体就没法看了。　我想这就是专业和业余的区别。