http://cpsr-rspc.hc-sc.gc.ca/PR-RP/recall-retrait-eng.jsp?re_id=939
Recall Notice
Date
January 19, 2010
Product Name
Safety 1st and Dorel Drop-Side Cribs
Full Product Description
This recall involves the 3-in-1 Carlisle drop-side crib with model number 10H020 in dark cherry, and the Tara drop-side crib with model number DAKM5132C in white. The crib name, model number, and "Dorel Distribution Canada" can be found on the assembly instruction sheet that is attached to the crib's mattress support board, as well as at the bottom of the crib's headboard.
The name "Dorel" or "Safety 1st" is printed on the crib's railing.
Hazard Identified
The crib's drop-side plastic hardware can break or deform. In addition, the drop-side can be installed upside-down, which can result in broken or disengaged plastic parts. All of these problems can cause the drop-side to detach in one or more corners. When the drop-side detaches, it creates space between the drop-side and the crib mattress. The bodies of infants and toddlers can become entrapped in the space which can lead to suffocation. Complete detachment of drop-sides can lead to falls from the crib.
In Canada, Dorel Distribution Canada has received 3 reports of the drop-side detaching from the crib and 4 other incidents where the slats on the crib broke. There were no reported injuries.
Health Canada has recieved 2 reports of incidents with no injuries.
Parents and caregivers are reminded to check their baby's crib regularly before using it and are instructed not to use it if any parts are loose or missing, or if there are any signs of damage. Only parts obtained from the original manufacturer must be used for repairs. Do not repair broken parts with tape, wire, or rope. Contact the manufacturer if replacement parts or additional instructions are needed.
For more information on crib requirements in Canada, as well as the safe use of cribs, see Health Canada's
Crib Safety Booklet. For more information on safe sleeping practices for infants, see Health Canada's
Consumer Information: Safe Sleep Practices for Infants.
Corrective Action
Consumers should carefully examine the plastic drop-side hardware for any signs of damage or that the drop-side is installed upside down. If there is any reason for concern, consumers should immediately stop using the recalled cribs and find an alternative, safe sleeping environment for their baby.
Consumers should not return the crib. Dorel Distribution Canada will be making available a free repair kit that converts the drop-side of the crib to a fixed side. The repair kits will be provided to owners within the next several weeks.
If consumers determine that their drop-side has been installed upside down or that the drop-side hardware is broken, loose, missing, or deformed, they should immediately stop using the crib and find an alternative safe sleeping environment for their baby. Consumers may contact Dorel Distribution Canada to receive replacement parts in addition to the repair kit.
For more information, consumers may contact Dorel Distribution Canada at 1-800-295-1980 between 8AM and 5PM ET Monday through Friday. Consumers may also visit
Dorel Distribution's website to verify if their crib is included in this recall.
Number Sold
In Canada, approximately 7600 of the recalled cribs were sold at Sears Canada and various other retailers.
Time Period Sold
The recalled products were sold from December 2006 to January 2010.
Manufactured in China and Vietnam.
Companies
Manufacturer
Dorel Distribution Canada of Ville St-Laurent, Quebec
Images
Image 1
3-in-1 Carlisle - model number 10H020
Image 2
Tara - model number DAKM5132C
Recall Notice
Date
January 19, 2010
Product Name
Safety 1st and Dorel Drop-Side Cribs
Full Product Description
This recall involves the 3-in-1 Carlisle drop-side crib with model number 10H020 in dark cherry, and the Tara drop-side crib with model number DAKM5132C in white. The crib name, model number, and "Dorel Distribution Canada" can be found on the assembly instruction sheet that is attached to the crib's mattress support board, as well as at the bottom of the crib's headboard.
The name "Dorel" or "Safety 1st" is printed on the crib's railing.
Hazard Identified
The crib's drop-side plastic hardware can break or deform. In addition, the drop-side can be installed upside-down, which can result in broken or disengaged plastic parts. All of these problems can cause the drop-side to detach in one or more corners. When the drop-side detaches, it creates space between the drop-side and the crib mattress. The bodies of infants and toddlers can become entrapped in the space which can lead to suffocation. Complete detachment of drop-sides can lead to falls from the crib.
In Canada, Dorel Distribution Canada has received 3 reports of the drop-side detaching from the crib and 4 other incidents where the slats on the crib broke. There were no reported injuries.
Health Canada has recieved 2 reports of incidents with no injuries.
Parents and caregivers are reminded to check their baby's crib regularly before using it and are instructed not to use it if any parts are loose or missing, or if there are any signs of damage. Only parts obtained from the original manufacturer must be used for repairs. Do not repair broken parts with tape, wire, or rope. Contact the manufacturer if replacement parts or additional instructions are needed.
For more information on crib requirements in Canada, as well as the safe use of cribs, see Health Canada's
![newwindow.gif](/proxy.php?image=http%3A%2F%2Fcpsr-rspc.hc-sc.gc.ca%2FPR-RP%2Fimages%2Fnewwindow.gif&hash=a34234e44d205186ca271f83f98ac7af)
![newwindow.gif](/proxy.php?image=http%3A%2F%2Fcpsr-rspc.hc-sc.gc.ca%2FPR-RP%2Fimages%2Fnewwindow.gif&hash=a34234e44d205186ca271f83f98ac7af)
Corrective Action
Consumers should carefully examine the plastic drop-side hardware for any signs of damage or that the drop-side is installed upside down. If there is any reason for concern, consumers should immediately stop using the recalled cribs and find an alternative, safe sleeping environment for their baby.
Consumers should not return the crib. Dorel Distribution Canada will be making available a free repair kit that converts the drop-side of the crib to a fixed side. The repair kits will be provided to owners within the next several weeks.
If consumers determine that their drop-side has been installed upside down or that the drop-side hardware is broken, loose, missing, or deformed, they should immediately stop using the crib and find an alternative safe sleeping environment for their baby. Consumers may contact Dorel Distribution Canada to receive replacement parts in addition to the repair kit.
For more information, consumers may contact Dorel Distribution Canada at 1-800-295-1980 between 8AM and 5PM ET Monday through Friday. Consumers may also visit
![newwindow.gif](/proxy.php?image=http%3A%2F%2Fcpsr-rspc.hc-sc.gc.ca%2FPR-RP%2Fimages%2Fnewwindow.gif&hash=a34234e44d205186ca271f83f98ac7af)
Number Sold
In Canada, approximately 7600 of the recalled cribs were sold at Sears Canada and various other retailers.
Time Period Sold
The recalled products were sold from December 2006 to January 2010.
Manufactured in China and Vietnam.
Companies
Manufacturer
Dorel Distribution Canada of Ville St-Laurent, Quebec
Images
Image 1
3-in-1 Carlisle - model number 10H020
Image 2
Tara - model number DAKM5132C