请问如何粘起裂开的石桌面（ONYX 石的）？

[MountainSunlight]

搬动时不谨裂开了的石桌面（ONYX 石的）。请问如何粘起来？

谢谢！

 

[frank.Irvine]

这还能救吗? 不懂，帮忙顶一下。。。

 

[balladmonger]

不管用什么胶粘起来，桌面下面都得重新加固才行。

 

[kpmgtd]

环氧树脂, epoxy

HomeDepot, Walmart all have it. Normally in two tubes and you need to mix them. Follow the instructions. As the other fellow said, you may want to put a piece of metal patch underneath to strength your fix.

 

[MountainSunlight]

谢谢楼上各位！

明天去找一下胶，希望是无色的胶。

桌面的下面加固， 可能也粘一片什么东东在下面。 不过，薄的可能没什么用（这石桌面很重。）

另，桌面和下面架子是分开的。架子没问题。

 

[kpmgtd]

无色的胶may not be as strong.

You can try Canadian-Tire. They have 1-minute epoxy glue (transparent) for windshield. But it dries a little bit too fast so you need to be very careful not to misalign the two pieces.

 

[Timothy's]

the epoxy you get for Canadian tire, so called 5 min epoxy is not strong enough for this kind of application.
use this one. http://www.westsystem.com/ss/g-flex-epoxy/ , the kit cost 25 dollars. lee valley has it. Check their website to see where to buy.
It takes 7 hour to cure and 5 days to get full strength. It is used to fix boat. I used it. It is very good,and easy to work with.

 

[balladmonger]

the epoxy you get for Canadian tire, so called 5 min epoxy is not strong enough for this kind of application.
use this one. http://www.westsystem.com/ss/g-flex-epoxy/ , the kit cost 25 dollars. lee valley has it. Check their website to see where to buy.
It takes 7 hour to cure and 5 days to get full strength. It is used to fix boat. I used it. It is very good,and easy to work with.

这个厉害

 

[MountainSunlight]

谢谢！

汇报一下：去 Canadian tire 和 HomeDepot, Walmart 问了。

Canadian tire 推荐 2Hrs epoxy；HomeDepot 推荐 SILICON 就行了，因为桌面和下面架子是分开的。架子没问题。还说 epoxy 太 strong 了。（想，如果不大搬动，SILICON 也许就行了； 但如搬家可能就有问题。）
Walmart 只有 5 min epoxy， 不好操作，据说也没有 2Hrs epoxy strong， 不考虑了。
Timothy's 说的第一种 epoxy，45min，是否没有 2Hrs epoxy strong？2Hrs epoxy 是否够 strong了？另一种要 5 days to get full strength 感到有些难操作。

2Hrs epoxy 和 SILICON 都买了，但还没有动，有些迷惑了。

 

[kpmgtd]

Both won't be strong enough for moving, I guess.

Epoxy will become hard after it cures but silicon will stay a bit soft. From that perspective, I will choose epoxy.