精华 手机问题, VOIP 问题

Freephoneline 帐号只能在电脑上(Windows, Mac) 和 ATA 上用。

Fongo (以前叫 DellVoice) 帐号可用于 iOS, Android, 电脑,和 ATA
media5可以用freephoneline的帐号,media5 苹果和安卓都有app.
 
哪,我就再给你说道说

俺去年初花 $25 把 BELL 号码转到 freephoneline 了。 ATA是 OBI110 (现在有更好的了),现在是 0 月费,加拿大长途免费。 再申请了个 voip.ms 帐号当 GATEWAY,打美国长途和中国长途 (好像是 每分钟1分钱)。

更方便的是,入神了: 我的手机/办公室电话现在也可以通过家里的电话(OBI110上有个自动应答机)实现打加国长途免费,打美国和中国每分钟1分钱。
obi电话盒在哪买的?voip.ms 帐号怎样收费的?
 
笨啊,搞个google voice,北美免费。voip.ms只用来打中国。俺的obi202可以设置4个SIP外加俩BT,freephoneline+voip.ms+gv+gv+bt(cellphone), 手机OBiON用obi202做voice gateway,自动根据destination选择sip account拨话。
你的google voice用什么软件?
 
obi电话盒在哪买的?voip.ms 帐号怎样收费的?
我是在 newegg.com 上买的。

voip.ms 帐号有两种,一种是只能打出不能打进的,按时收费(用于打中国长途的),不给你电话号码; 另一种是能打进也能打出,给你个号码,有两种收费方式: 一种是每月交0.99, 然后LOCAL每用分钟收一分钱,另一种是每月4.99,LOCAL 随便打
 
喜欢折腾的话。。。
http://nerdvittles.com/?p=5527
http://s.taobao.com/search?initiati...E7%BB%B0+sip&stats_click=search_radio_all%3A1
Google voice
http://s.taobao.com/search?initiati...%B4%F3%BA%C5&stats_click=search_radio_all%3A1
Skype 世界通。
freephoneline.ca
加起来
可以全球40个国家。。。。。13.99/M, 适合电话多的人。。。每天可以打5小时。。。。
可以有一个中国城市电话号码。固定电话。。。月租 几十人民币
加拿大本地号码。。
美国号码
英国号码。。。等等都可以。
 
我是在 newegg.com 上买的。

voip.ms 帐号有两种,一种是只能打出不能打进的,按时收费(用于打中国长途的),不给你电话号码; 另一种是能打进也能打出,给你个号码,有两种收费方式: 一种是每月交0.99, 然后LOCAL每用分钟收一分钱,另一种是每月4.99,LOCAL 随便打
Additional info.:
voip.ms 帐号有两种," 一种是每月交0.99, 然后LOCAL每用分钟收一分钱 . . . " +911 monthly fee (can't remember $)
Min. deposit US$25+tax
哪,我就再给你说道说

俺去年初花 $25 把 BELL 号码转到 freephoneline 了。 ATA是 OBI110 (现在有更好的了),现在是 0 月费,加拿大长途免费。 再申请了个 voip.ms 帐号当 GATEWAY,打美国长途和中国长途 (好像是 每分钟1分钱)。

更方便的是,入神了: 我的手机/办公室电话现在也可以通过家里的电话(OBI110上有个自动应答机)实现打加国长途免费,打美国和中国每分钟1分钱。
Freephoneline: "$25 把 BELL 号码转到 freephoneline" should have paid also $50+tax to buy SIP setting.
Freephoneline 帐号只能在电脑上(Windows, Mac) 和 ATA 上用。

Fongo (以前叫 DellVoice) 帐号可用于 iOS, Android, 电脑,和 ATA
This is different topic from mobile, I'll start new post, hope u don't mind helping out.
 
出大事了: 昨天晚上要把 OBI202 换个地方,于是拔电源,卸网线。 到新地方,插上电话线,网线,再插上电源。 NND, 就红灯亮,啥动静也没有。 怎么折腾,就是不动。。。

要知后事如何,且听下回分解。
 
出大事了: 昨天晚上要把 OBI202 换个地方,于是拔电源,卸网线。 到新地方,插上电话线,网线,再插上电源。 NND, 就红灯亮,啥动静也没有。 怎么折腾,就是不动。。。

要知后事如何,且听下回分解。
:monster:
Re: Power light blinking, no IP
« Reply #12 on: August 29, 2012, 10:18:38 am »
I had the same problem with my OBi202. I tried everything to revive it. I finally was able to revived it with the help of OBi support. What is not obvious is that you have to hold the reset pin down for a very long time. The best way to do this is to look at the OBi until the power LED light flashes green fast.

How to properly factory reset:
1) With paper clip in hand unplug OBi, insert paperclip, then insert power plug. Power LED should be red before inserting the paperclip.
2) OBi power LED should eventually flash green slow, then after some time flash green fast. If you keep pressing the paperclip it should eventually go to red. While it is flashing green fast, you can release the paperclip. It is not obvious when to release the paperclip. It is better to follow the visual cue of the unit rather than relying on a preset number of seconds to release the paperclip. Most users will loose patience or assume that they have pressed it with sufficient time. In my case it was close to 60 seconds before it was flashing green fast.

The OBi202 is not as stable as the previous units, or it takes much longer before the unit becomes stable after configuration changes. I suppose because it has more features, more things can mess up the unit if we make many changes. I have abused the OBi100/110 and never had a problem. I am not keen on making too many tests on the OBi202 at this point. I have had to factory reset it several times.


REPLY:
In this case, please try to do factory-reset when you power cycle the device by pressing the reset pin as soon as the POWER LED turns to red. Noted that the reset pin needs to be pressed for about 40-50 seconds (or until LED starts to blink in green rapidly).

-Obihai Support.
 
出大事了: 昨天晚上要把 OBI202 换个地方,于是拔电源,卸网线。 到新地方,插上电话线,网线,再插上电源。 NND, 就红灯亮,啥动静也没有。 怎么折腾,就是不动。。。

要知后事如何,且听下回分解。
不惊讶,围观的兴趣都没有:evil:
 
:monster:
Re: Power light blinking, no IP
« Reply #12 on: August 29, 2012, 10:18:38 am »
I had the same problem with my OBi202. I tried everything to revive it. I finally was able to revived it with the help of OBi support. What is not obvious is that you have to hold the reset pin down for a very long time. The best way to do this is to look at the OBi until the power LED light flashes green fast.

How to properly factory reset:
1) With paper clip in hand unplug OBi, insert paperclip, then insert power plug. Power LED should be red before inserting the paperclip.
2) OBi power LED should eventually flash green slow, then after some time flash green fast. If you keep pressing the paperclip it should eventually go to red. While it is flashing green fast, you can release the paperclip. It is not obvious when to release the paperclip. It is better to follow the visual cue of the unit rather than relying on a preset number of seconds to release the paperclip. Most users will loose patience or assume that they have pressed it with sufficient time. In my case it was close to 60 seconds before it was flashing green fast.

The OBi202 is not as stable as the previous units, or it takes much longer before the unit becomes stable after configuration changes. I suppose because it has more features, more things can mess up the unit if we make many changes. I have abused the OBi100/110 and never had a problem. I am not keen on making too many tests on the OBi202 at this point. I have had to factory reset it several times.


REPLY:
In this case, please try to do factory-reset when you power cycle the device by pressing the reset pin as soon as the POWER LED turns to red. Noted that the reset pin needs to be pressed for about 40-50 seconds (or until LED starts to blink in green rapidly).

-Obihai Support.
哈哈
 
后退
顶部