teddyisabear
新手上路
- 注册
- 2011-11-21
- 消息
- 57
- 荣誉分数
- 0
- 声望点数
- 16
好的好的谢谢 deepthroat 我马上就查查看看哪个比较好， 太感谢大家了
锅炉问题请教大家，
- 主题发起人 teddyisabear
- 开始时间
LENNOX 90UG same as mine 14 years.
teddyisabear
新手上路
- 注册
- 2011-11-21
- 消息
- 57
- 荣誉分数
- 0
- 声望点数
- 16
teddyisabear
新手上路
- 注册
- 2011-11-21
- 消息
- 57
- 荣誉分数
- 0
- 声望点数
- 16
好的！谢谢你
http://hvac-talk.com/vbb/showthread.php?168783-Furnace-DC-Motor-Cost-Savings
When considering purchasing a new furnace the topic of whether to go for a DC or AC motor comes up a lot and it is a very valid point of consideration because depending which way you choose to go, it will affect your home comfort and also could amount to energy savings.
FUE and Energy Efficiency
When shopping around for furnaces, the term AFUE comes up a lot but that only tells part of the story when it comes to energy efficiency. AFUE only measures how much of the gas is actually turned into heat but one must consider that inside every furnace, there is an electric motor that is responsible for circulating the air and is therefore another matter to consider when measuring energy efficiencies. This is why looking at the Energuide tags tells a more complete story.
AC Motors
Most mid-efficiency and low-end furnaces have these kinds of motors. They do their job just fine and are usually cheaper than DC motors but that’s about their only advantage; If the blower motor ever breaks outside of warranty, replacing an AC one is cheaper.
ECM motors, DC motors or variable speed motors
All of the above terms are used to refer to the same thing: DC Motors. These motors do the same job as AC motors but they operate at least 50% more efficiently than AC motors. DC motors come in either constant torque or variable speed modes. Most high-end furnace models have a variable speed motor because it allows them to control the amount of output air more smoothly than any other model, thus resulting in increased overall comfort. In general, a modulating furnace with a variable speed dc motor produces a steadier, more comfortable temperature.
What about cost savings?
If you ask an expert, they will most likely tell you that in general DC motors will move air around your home while consuming less watts – but in terms of real energy savings, it does depend a lot on your usage. Buying an energy efficient furnace is a bit of a long term investment and sometimes the price difference is not made back in savings until a couple of years down the road but if you think of it in the sense that, yes, you might be putting more money down up front but your yearly energy bills will be lower.
When considering purchasing a new furnace the topic of whether to go for a DC or AC motor comes up a lot and it is a very valid point of consideration because depending which way you choose to go, it will affect your home comfort and also could amount to energy savings.
FUE and Energy Efficiency
When shopping around for furnaces, the term AFUE comes up a lot but that only tells part of the story when it comes to energy efficiency. AFUE only measures how much of the gas is actually turned into heat but one must consider that inside every furnace, there is an electric motor that is responsible for circulating the air and is therefore another matter to consider when measuring energy efficiencies. This is why looking at the Energuide tags tells a more complete story.
AC Motors
Most mid-efficiency and low-end furnaces have these kinds of motors. They do their job just fine and are usually cheaper than DC motors but that’s about their only advantage; If the blower motor ever breaks outside of warranty, replacing an AC one is cheaper.
ECM motors, DC motors or variable speed motors
All of the above terms are used to refer to the same thing: DC Motors. These motors do the same job as AC motors but they operate at least 50% more efficiently than AC motors. DC motors come in either constant torque or variable speed modes. Most high-end furnace models have a variable speed motor because it allows them to control the amount of output air more smoothly than any other model, thus resulting in increased overall comfort. In general, a modulating furnace with a variable speed dc motor produces a steadier, more comfortable temperature.
What about cost savings?
If you ask an expert, they will most likely tell you that in general DC motors will move air around your home while consuming less watts – but in terms of real energy savings, it does depend a lot on your usage. Buying an energy efficient furnace is a bit of a long term investment and sometimes the price difference is not made back in savings until a couple of years down the road but if you think of it in the sense that, yes, you might be putting more money down up front but your yearly energy bills will be lower.
最后编辑:
deepthroat
资深人士
- 注册
- 2016-01-06
- 消息
- 4,345
- 荣誉分数
- 1,016
- 声望点数
- 223
goodman, 2 stage
teddyisabear
新手上路
- 注册
- 2011-11-21
- 消息
- 57
- 荣誉分数
- 0
- 声望点数
- 16
太感谢你了！ 谢谢大家
- 注册
- 2012-02-02
- 消息
- 1,389
- 荣誉分数
- 189
- 声望点数
- 223
reliance有点贵，不过是大公司，服务可能还可以
我上次找的一个小公司，觉得也还挺好，用的GOODMAN 2 STAGE节能的，还能从政府拿一点REBATE
http://zenitheco.ca/
