我刚换了电池了,可是还继续响。网上说的Sealed Battery Models(红字)是什么意思啊?我怎么知道我家的是什么model?
Consistently chirping smoke alarms
The following conditions could cause your smoke alarm to chirp consistently:
- Low Battery Condition – The alarm will "chirp" every 30-40 seconds (some alarms every 60 seconds) for a minimum of seven days. Replace the battery when this occurs, then test your alarm.
- Alarm Malfunction – The alarm will "chirp" between flashes of the Red LED. If this occurs, press and hold the Test button for a minimum of two seconds. If the alarm does not sound your unit has a defective battery or other failure.
- Hush Condition – If your alarm has the Hush feature, the alarm will "chirp" every 30-40 seconds for approximately seven minutes while the Hush feature is activated.
- End of Life Condition (Sealed Battery Models Only) – The alarm will "chirp" every 30 seconds to indicate it is time to replace the alarm.
- Interference (For Wireless Alarms Only) – If your smoke alarm enters into Full Alarm and there is no presence of smoke, and the test buttons have not been activated on any units, it is likely you are receiving interference from a similar nearby system. To correct this, refer to your user's manual on how to select a different dipswitch pattern.