[交流] 玩儿车的请进。。。关于改装的问题（附图）

[馨枫]

我记得plq的引擎是B18C吧？ DC2 GSR
小声问一下h22是哪款来着？

 

[plq]

嗯，我的是B18C1 GSR. H22是PRELUDE的发动机。200hp / 161lb-ft. 马力和扭力都很不错，就是发动机本身太重了。SWAP这类发动机的车没法跑CIRCUIT, 头重，很多时候有的弯转不过来。所以只能加TURBO然后去跑DRAG。

 

[馨枫]

200hp / 161lb-ft ！那我上次干掉一辆是因为开车的技术不好啊 ！
头重也应该有弥补的方法吧，例如 换个HOOD，拆掉空调之类的东西。
顺便问一下， Hyundai Tiburon怎么样啊？个人觉得很垃圾，不过还是有人说好的，听朋友说能跑到230KM/H + ，不知真假。上次一个鬼佬到我打工的地方找我飚车，他开的就是V6版的加了个INTAKE。之后他输了就说车没调好，就加个进气还调个啥劲儿啊？ 还有一个中东人，愣说他的96 ALTIMA 4缸版加了INTAKE，CAT-BACK，RACING 离合 STAGE 1 车有240马力！后来输了说技术失误，你说我怎么老遇见这样儿的阿，愁死我了 。

 

[FaTlOnG(. )( .)]

最初由 馨枫 发布
200hp / 161lb-ft ！那我上次干掉一辆是因为开车的技术不好啊 ！
头重也应该有弥补的方法吧，例如 换个HOOD，拆掉空调之类的东西。
顺便问一下， Hyundai Tiburon怎么样啊？个人觉得很垃圾，不过还是有人说好的，听朋友说能跑到230KM/H + ，不知真假。上次一个鬼佬到我打工的地方找我飚车，他开的就是V6版的加了个INTAKE。之后他输了就说车没调好，就加个进气还调个啥劲儿啊？ 还有一个中东人，愣说他的96 ALTIMA 4缸版加了INTAKE，CAT-BACK，RACING 离合 STAGE 1 车有240马力！后来输了说技术失误，你说我怎么老遇见这样儿的阿，愁死我了 。

呵呵 这里好多老外都是ricer~ 喜欢自己计算自己的马力 intake+15 catback+15 最后可能连帖纸都能算上 然后在真空没有阻力的环境下 说不定能达到自己说的数字. 还多数是排气震天响 跑的比牛还慢.

 

[FaTlOnG(. )( .)]

最初由 kevio180 发布
no his just ordering for us for a group deal on carbon fiber hoods

Vic thanks anyways, then that leaves me more money for other things, lol, i really really need to get my suspension done, lol

By my calculations, I might be able to get the bigger turbo this summer, but I'm still deciding on running the 250whp or going up to pass 280whp with a bigger one, lol, cause I really don't want to spend a lot of money then end up not that fast, lol What do you guys think? 250whp or more? its like only a $400 difference.

你现在多少whp了? 我个人不建议你弄到280, 因为ff的torque steering还是很恐怖的. 除非你以后只想跑0-400. 我觉得花钱在加大马力上不如在drivetrain和悬挂上加以改造, 比如shorter shifter还有轻量化pully和flywheel.还有最重要的一点就是 马力上去了刹车系统和冷却系统也要跟上 一套对应280whp(300+ flywheel hp)的至少要是个4活塞甚至6活塞的卡钳了吧加上ic 那银子大把大把的往里投.....

 

[FaTlOnG(. )( .)]

最初由 kevio180 发布
Audi S4? which year is it? Nice, we should be running most things from the same companys, lol, easy findings. I'm just running a CAI on it for now, waitting for my next pay cheaque so I can order my cup kit and sway kit.

The BOV I was actually going to go with the Bailys DV since its a one time thing and don't have to look after it. Now Forge just came out with a BOV/DV all in one, so that might be good. On the few sites I look at, it seems S4 is better running a DV, not a BOV, you still get the same sound just not as loud, and the only ones I found was made by Forge, dont know if Bailys would fit but they are really reliable.

我开2000年b5的s4 2.7 bi-turbo的. 咱们有好多的东西可以互用~~ 说道dv我倾向于bosch 710n audiworld论坛里好多人推荐, 因为我不打算把boost的太高,最多chip到1.0bar差不多318hp/382lb-ft了.bosch的dv就行.还有就是我需要两个dv 要是买bailys的话就需要400刀了......

 

[FaTlOnG(. )( .)]

对了kevio180 忘了问你是是想上k04 stage3到280whp吗? 居我所知esctuning卖stage3 kit(290hp/296torpue) $4500usd....

http://www.ecstuning.com/stage/edpd...ne=1.8T&category=Engine&subcategory=Turbo Kit

 

[kevio180]

I will actually get everything else all done before I upgrade the turbo, so I won't have any problems running it.

I'm actually going with the GT2871 turbo kit, its $1750US, the I will get all the upgrades before the turbo goes in. And Tapp's tuning it should just hit 280whp+, local tuning is better than sending my ECU to somewhere else and not have my car running, cause I really need it everyday, lol.

The Ko4 turbo I heard around the forums that it isn't bad for smaller boosts, but with higher boost it tend to heat up really quick and it brakes really easy, so I don't want to get that.

I was thinking of going the GT20 turbo, but Tapp told me under street/track that won't get to 250whp, only on a dyno with cooling fans all around, so that was a disappointment for me, so I will get the bigger turbo, lol, don't want to spent $400 less and not happy with the speed.

I probably will be picking up a DV, the short shifter and a TT shifter too after this pay day. You can get the Forge BOV kit, those I heard have nice sounds.

Are you just planning on chipping it and done with your engine mods? and go on with suspension and the rest?

 

[FaTlOnG(. )( .)]

哇真是个大工程啊~~ 能坐一下你的车我就满足了~~ 280whp= 0-100< 4.5 sec? 你在那里chip的? 都能做什么可以改tip chip吗? 主要是渥太华的路实在是太烂了,s4的悬挂已经比我以前的a4硬了不少,所以我还没有换的打算 最多把我以前的h&r race spring换上. 至于发动机的mod那要看我兜里有多少钱毕竟s4是bi-turbo的 升级起来是无底洞啊...

 

[FaTlOnG(. )( .)]

GT2871 相当与几号的turbo? lag问题能解决吗?

 

[kevio180]

GT2871 will lag a bit, I think the big pull comes in around 4500rpm, now I'm thinking that's kinda stupid for me since I hardly ever go to the drag strip, and I might go to the track like 2 times a year, lol, I'm still deciding, got all summer. I found a KO4 kit for $1400US, running 235hp/285tq, it isn't bad, just I don't know how fast that is, since our cars are so so fat compared to others, I don't know if that be enough. And I really want to be running close to plq's civic, lol

 

[plq]

如果你们想CHIP ECU的话，可以找PSI TUNNING。技术什么的都非常不错，不会比TAPP'S AUTO差，而且价钱肯定比他们便宜。

我已经等不及想和大伙儿出来跑跑了。你们都什么时候考完试呢？

 

[FaTlOnG(. )( .)]

呵呵 看来plq是大家的目标啊~~ 那我还是不丢人了 谁带着我跑跑 让我见识一下就好了啊~~
大家什么时候考完试?

 

[FaTlOnG(. )( .)]

最初由 kevio180 发布
GT2871 will lag a bit, I think the big pull comes in around 4500rpm, now I'm thinking that's kinda stupid for me since I hardly ever go to the drag strip, and I might go to the track like 2 times a year, lol, I'm still deciding, got all summer. I found a KO4 kit for $1400US, running 235hp/285tq, it isn't bad, just I don't know how fast that is, since our cars are so so fat compared to others, I don't know if that be enough. And I really want to be running close to plq's civic, lol

同意你的看法 确实大号的turbo需要更高的转速才能工作, 平时没有什么机会. k04是个不错的选择 但是ecu的调教更为重要, 我记得giac调audi a4 1.8 k03 turbo能达到243lb-ft在1800转速一直持续到5500. 虽然狃距不是很大但是工作区间非常好, 也就是刷个chip就能达到效果.

 

[plq]

千万别这么说，我戴不起这顶高帽的。其实我和你们差了几个档次的，特别还是S4呢。如果跑DRAG的话连你们的尾灯看不看到还不知道呢。只不过是我改车比较注重综合性能方面，跑CIRCUIT的话可能跟你们还有一拼。