关于ITalkBB电话.

一般家用router的QOS只能设置上行下行流量等简单功能,你用的是商业router?

The SPA2102 ATA provided by iTalkBB can do QoS. Many routers out there can also do QoS. No need for for whatever you mean by 商业router:confused:
 
我来说两句吧,看我的网名就知道我是搞这个的。
我10年前就开始搞VoIP了,可是现在家里还是用的bell的电话。主要是VoIP还不具备像家庭用户提供服
务的网络。现在各个VoIP运营商都有自己的服务器,和到PSTN及移动网的网关。但互相没有漫游业务。拿
iTalkbb来讲,它的媒体服务器和PSTN网关很可能在中国。因此你的电话如果打到中国,首先,你的那个电话适配器把你的电话模拟信号转成数字信号(第一次2/4线转换),这个数字流到中国后,在媒体网
关落地,进入PSTN网(4/2线转换)。由于中间没有太多的缓存,你的电话延时比较小,因此在你
那个适配器和PSTN网关里的回波消除会把回声消掉,你的声音质量还是可以接受的。但如果你打到本
地,由于所有的电话号码都设置成了国内的号码,你的声音流首先被streaming到国内的媒体服务器,然后再转到北美的服务器(我是这么猜的)。中间的延时和缓存大大增加。那些回波消除电路通常也就能消
除几十到几百毫秒的延时。延时超过300ms,就基本不起作用了。因此你感觉像唱卡拉OK。你可以试
一下,打国内的移动电话,声音也不太好。主要是又经过一级2/4线转换和编解码。
那VoIP没市场,你还搞什么呢?现阶段主要是搞企业级别的设备。这些设备联网以后,媒体流可以直接传
到被叫方最近的媒体服务器。如果是在VPN里,还可以从电话传到电话。因此效果很好。
什么时候VoIP家用电话才能用呢?等什么时候iTalkbb和Bell, Rogers有VoIP漫游协议,共享网关。(3GPP IMS实现了) 此外服务商还要认证家用配套路由器。如有的网友说的,路由器也是接不着电话问题之一。
此外,那些说只有断掉Internet质量才好的网友,检查一下你的每一个电话是否都装了那个电话滤波器?
应该不会是这样的。

虽然有些术语看不懂,但感觉这位朋友写得很专业。

我去年6月也开始用iTalkBB,发现根本无法取代Bell的电话。后来,我把它带回国内(因为从国内打加拿大是免费),发现从国内打到加拿大效果倒是比较满意,因此,我就干脆把它放国内了,给国内的亲人使用,我自己也可以打这个"Local"电话回去,我每个月支付不到$10钱的费用。
 
I don't know about SPA2102 ATA, but I know most home and small office routers only provide simple QOS, no QOS for VOIP

The SPA2102 ATA provided by iTalkBB can do QoS. Many routers out there can also do QoS. No need for for whatever you mean by 商业router:confused:
 
虽然有些术语看不懂,但感觉这位朋友写得很专业。

我去年6月也开始用iTalkBB,发现根本无法取代Bell的电话。后来,我把它带回国内(因为从国内打加拿大是免费),发现从国内打到加拿大效果倒是比较满意,因此,我就干脆把它放国内了,给国内的亲人使用,我自己也可以打这个"Local"电话回去,我每个月支付不到$10钱的费用。

The SIP Proxy server is for the purpose of signaling and routing messages. The actual packets do go to China.
 
The SIP Proxy server is for the purpose of signaling and routing messages. The actual packets do go to China.

I mean the actual packets do not travel to China and come back:D
 
You Bell modem may have router in it already. Check if it can do QoS (most likely it won't). In this case, set your Bell modem in bridge mode, i.e., disable the router functions and use it as pure modem. Then connect the ATA to the modem and use ATA as the router.
我们都用laptop, wireless connection, Bell modem 有wireless router in it,但是ATA没有,这个连法可能不可行。
 
我们都用laptop, wireless connection, Bell modem 有wireless router in it,但是ATA没有,这个连法可能不可行。

You are using iTalkBB service and don't have a ATA?
 
我们都用laptop, wireless connection, Bell modem 有wireless router in it,但是ATA没有,这个连法可能不可行。

I see what you mean. Get another wireless router that only costs you 25 dollars:)
 
听我的:

如果你家的网速够快,用吧。

如果不快,建议不要用。
 
Just wanna share with you how my setup is like at home. First of all, I used Rogers as my ISP, 7M speed. I connect Roger's modem to the ITalkBB router first, and then connect my home's wireless router behind the iTalkBB router. My home's computers are all connected to my home's wireless router. I am not saying this is the best approach, but it works for me. Note: when I do BT download, I still have to stop it when I want to use the phone, but regular internet browsing has no problem.

我以前是ROGERS1M的网络,电话质量很差.后来改成7M以后,效果好多了.
 
他们可以试用一个月, 客服还是很不错的了. 随时可以取消. 最好的办法是你亲自试一试. 每个人的情况都不同, 声音效果也不同. 但你绝对不要期望IP电话和常规电话一样的效果, 最大的缺点是稳定性不好(取决于网洛). 所以一定要有手机备用. 以防紧急情况.
 
我们都用laptop, wireless connection, Bell modem 有wireless router in it,但是ATA没有,这个连法可能不可行。

Another way to imporve the quality is to change the codec. The current codec being used by iTalkBB is G729a. G729a gives you cell phone quality in North America. You can change to G711 to get landline phone quality with a bit more bandwidth consumptions.
 
Another way to imporve the quality is to change the codec. The current codec being used by iTalkBB is G729a. G729a gives you cell phone quality in North America. You can change to G711 to get landline phone quality with a bit more bandwidth consumptions.
Change to G729a, How?
 
VoIP

他们可以试用一个月, 客服还是很不错的了. 随时可以取消. 最好的办法是你亲自试一试. 每个人的情况都不同, 声音效果也不同. 但你绝对不要期望IP电话和常规电话一样的效果, 最大的缺点是稳定性不好(取决于网洛). 所以一定要有手机备用. 以防紧急情况.

“你绝对不要期望IP电话和常规电话一样的效果”, 为什么?我们公司用的就是VoIP,效果和常规电话一样。
 
后退
顶部