自己换轮胎容易吗？

[appledriver]

我有四个雪胎全在rim上。今年想DIY一下，自己换胎。不知道容易吗？需要什么工具？怎么才能知道螺丝拧得够紧了？

 

[nowhere001]

容易，但是个力气活。工具全在你的后备箱里。先略微松开一个轮胎的所有螺钉（略微松开，不要完全松开），然后用千斤顶把这个轮胎的车一侧顶起，使轮胎悬空，然后全部松开轮胎螺钉，取下轮胎，把雪胎装上，拧上螺钉，但不要拧紧。然后放下千斤顶，使雪胎完全着地，拧紧全部螺钉。重复上述步骤装其它三个雪胎。

 

[Beefburger]

你需要知道螺钉用多少torque拧进去

 

[hcloud]

容易，但是个力气活。工具全在你的后备箱里。先略微松开一个轮胎的所有螺钉（略微松开，不要完全松开），然后用千斤顶把这个轮胎的车一侧顶起，使轮胎悬空，然后全部松开轮胎螺钉，取下轮胎，把雪胎装上，拧上螺钉，但不要拧紧。然后放下千斤顶，使雪胎完全着地，拧紧全部螺钉。重复上述步骤装其它三个雪胎。

拆装轮胎的时候走对角线， 拧螺丝的时候，如果是5个就是走五角星， 4个还是先对角线。
装上开100公里以后重新紧一下螺丝。

 

[abacada]

The vehicle manual will tell you the torque. But you need torque wrench. By practice, I tight as hard as I can.
For safety, be sure working in a level space e.g. garage or street, not your driver way. Driver way is generally not level, and vehicle may move and cause problem.

 

[appledriver]

看来还得买个torque wrench啊。哪种比较好呢？

 

[coolslight]

看来还得买个torque wrench啊。哪种比较好呢？

http://www.canadiantire.ca/AST/brow...%2BTorque%2BWrench.jsp?locale=en#BVRRWidgetID

"I bought the 1/2 inch model on sale for $54.99 and used it for my winter tire change over and it is great. It is easy to adjust, comes with great instruction manual, clicks nice and loud when you reach the desired torque setting, and a must buy if changing your own tires. I recommend to keep the plastic case it came in for protection."

Mastercraft 233-piece Socket Set
http://www.canadiantire.ca/AST/brow...+Socket+Set.jsp?locale=en#tab_page_reviews_li

Fantastic fully loaded socket set for $79.99

 

[folinc]

你需要知道螺钉用多少torque拧进去

这个那里可以查？

 

[27149]

This should be good enough. Bought one last year on sale for $7.99.

http://www.canadiantire.ca/AST/browse/6/Tools/Wrenches/SpecialtyWrenches/PRD~0588660P/Torque%252BWrench%25252C%252B1%25252B2-in.%252B/CROSSSELL~0588557%20Mastercraft%2BTorque%2BWrench.jsp?locale=en

Make sure you get a socket extension or longer socket, otherwise as one comment said "you will skin your hand against the fender".

看来还得买个torque wrench啊。哪种比较好呢？

 

[lifelife]

看来还得买个 torque wrench啊。哪种比较好呢？

War-mart, Canadian tire 都有十字型四头的卖，一般都够用了。

 

[Beefburger]

这个那里可以查？

The vehicle manual will tell you the torque. But you need torque wrench. By practice, I tight as hard as I can.
For safety, be sure working in a level space e.g. garage or street, not your driver way. Driver way is generally not level, and vehicle may move and cause problem.

:blink: :blink:

 

[o&o]

可以买一个自带测扭力的，到劲后咔吧一声响就搞掂了。放心了

 

[月下独酌]

The vehicle manual will tell you the torque. But you need torque wrench. By practice, I tight as hard as I can.
For safety, be sure working in a level space e.g. garage or street, not your driver way. Driver way is generally not level, and vehicle may move and cause problem.

as tight as u can = break a stud.

 

[appledriver]

这么多大侠都做过这活。俺的信心也足了不少。决定自己练一次。

 

[ygzhao]

一般的车轮的上紧力矩大概是90-100磅尺。