自己换轮胎容易吗？

[ccc]

俺是笨办法：多大力拆卸下来的，就多大力再扭回去。

八九不离十。

 

[潜水鸟]

最后踹几脚，就没问题了，哈哈

 

[xianrenyige]

http://www.canadiantire.ca/AST/brow...%2BTorque%2BWrench.jsp?locale=en#BVRRWidgetID

"I bought the 1/2 inch model on sale for $54.99 and used it for my winter tire change over and it is great. It is easy to adjust, comes with great instruction manual, clicks nice and loud when you reach the desired torque setting, and a must buy if changing your own tires. I recommend to keep the plastic case it came in for protection."

请问如果只为换轮胎，是买1/2还是3/8的torque wrentch? 谢谢！

 

[老华侨]

...
装上开100公里以后重新紧一下螺丝。

本人若干年来都是自己换。
但LS这么一说，却让我没有了主意：
这个建议听起来非常有道理；但与实际生活不符 -- 我相信大多数人的车都是通过车行换的轮胎，有哪个车行说“开100公里后，再开回来让我们重新紧一下螺丝”？

这是不是跟有些现代物理相类似 -- 有些理论推理，与实际观察不相符？

 

[hijmmu]

http://www.canadiantire.ca/AST/brow...%2BTorque%2BWrench.jsp?locale=en#BVRRWidgetID

"I bought the 1/2 inch model on sale for $54.99 and used it for my winter tire change over and it is great. It is easy to adjust, comes with great instruction manual, clicks nice and loud when you reach the desired torque setting, and a must buy if changing your own tires. I recommend to keep the plastic case it came in for protection."

请问如果只为换轮胎，是买1/2还是3/8的torque wrentch? 谢谢！

1/2

 

[yoy]

本人若干年来都是自己换。
但LS这么一说，却让我没有了主意：
这个建议听起来非常有道理；但与实际生活不符 -- 我相信大多数人的车都是通过车行换的轮胎，有哪个车行说“开100公里后，再开回来让我们重新紧一下螺丝”？

这是不是跟有些现代物理相类似 -- 有些理论推理，与实际观察不相符？

卡车都要的。汽车还真没有。可能负重小。但我自己的车都会在紧一遍。没害处。

 

[Teddy]

Actually, I noticed that both Canadian Tire and Costco require a second visit to re-tighten wheels in their "terms", although nobody really mentioned it to me before...

卡车都要的。汽车还真没有。可能负重小。但我自己的车都会在紧一遍。没害处。

 

[xianrenyige]

1/2

谢谢！买1/2是因为它的柄长省力还是别的什么原因？

 

[hijmmu]

谢谢！买1/2是因为它的柄长省力还是别的什么原因？

1/2"-drive torque wrench, with 20 - 250 lb-ft. torque setting
3/8"-drive torque wrench, with 30 - 250 lb-in. torque setting

换轮胎, 100 lb-ft. 左右

 

[xianrenyige]

1/2"-drive torque wrench, with 20 - 250 lb-ft. torque setting
3/8"-drive torque wrench, with 30 - 250 lb-in. torque setting

换轮胎, 100 lb-ft. 左右

谢谢！但我在CT网上看到：
3/8"-drive torque wrench, with 30 - 250 lb-in. torque setting

1/2"-drive torque wrench, with 20 - 250 lb-in. torque setting

好像计量单位是一样啊，两者没多大区别啊。
http://www.canadiantire.ca/AST/brow...stercraft+Maximum+Torque+Wrench.jsp?locale=en

 

[hijmmu]

谢谢！但我在CT网上看到：
3/8"-drive torque wrench, with 30 - 250 lb-in. torque setting

1/2"-drive torque wrench, with 20 - 250 lb-in. torque setting

好像计量单位是一样啊，两者没多大区别啊。
http://www.canadiantire.ca/AST/brow...stercraft+Maximum+Torque+Wrench.jsp?locale=en

这次CT在网上把3/8"写错了，你到店里看看产品说明就知道了。